The program description deals with the following:
The data for connection of a payment terminal, type Cetrel EFT, can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can be displayed for information.
The interface and link to a processing unit should be defined here and the number of the device-specific operation mode of the EFT terminal set.
Payment terminal devices are required for payment with magnetic cards. Further parametering is necessary, e.g. the appropriate Payment type with link of the permitted Credit card, etc., to operate this terminal.
The following description deals with all available options for update of this basic data.
As with nearly all programs the following also applies here:
Field with firmly defined selection options
Select one of the baud rates offered by clicking onto the field and with a second click choosing the baud rate required.
The system offers the following baud rate:
Field with firmly defined selection options
Select one of the debug levels offered by clicking onto the field and with a second click choosing the debug level required.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for the debug level if
a protocol for communication of the payment terminal is required for error
analysis. Details can be found in file "errlog" in directory work of the appropriate system unit.
Entry range permitted: numeric 1 - 9999
Enter the POS no. in this field. Further information can be obtained from the device description.
Entry range permitted: numeric 1 - 999999
Enter the operator no. in this field. Further information can be obtained from the device description.
Default = 60
Default = 8000
Default = 1
Enter the number of the terminal in this field. The value entered here must match up to the entry in the appropriate payment type, i.e. the payment terminal whose no. has been entered in program Payment type will be selected.