ADS customer display

The program description deals with the following:

Remarks on Program function
Remarks on Data fields
Use Index to find the field details required

Remarks on program function

The data for an ADS customer display can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.

The interface and link to a processing unit must be defined in addition to the device-specific operating mode data of the ADS customer display.

Remarks on data fields

The following description deals with all available options for update of this basic data.

As with nearly all programs the following also applies here:

The entry mask for this program may differ in your MICROS Retail OSCAR POS program. Some data fields may be missing.
There may be defaults or firmly defined selection options for some data fields. These cannot be updated in the current program.
Fields with enforced entry defined are to be found in the entry masks as are fields where entry is optional.
If the data record is updated over several pages of entry masks, the dialog window is reached by clicking onto the appropriate button with <Mouse key 1>.
The same procedure also applies to call up of another update program from this program.
In some cases you may find so-called "Switches" which are activated or deactivated by the user with <Mouse key 1>, depending on the setting. Activated switches have a dark top, deactivated switches are lighter.

Usage

Field with firmly defined selection options

Select one of the operation modes offered by clicking onto this field and with a second click choosing the mode required.

The system offers the following operation modes:

Operator display
Customer display

Debug

Field with firmly defined selection options

Select one of the debug levels offered by clicking onto this field and with a second click choosing the debug level required.

The system offers the following debug level:

0 = no protocol of data communication in file "errlog"
1 =
2 =
3 = display of all communication data in file "errlog"

Note:
Only select a value higher than "0" for the debug level if a protocol is required for error analysis. The details appear in file "errlog" in directory work of the appropriate system unit.

MICROS Retail Deutschland GmbH
Salzufer 8
D-10587 Berlin