The program description deals with the following:
The data for a C-ZAM EFT device can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.
EFT devices are necessary for payments with magnetic cards.
The following description deals with all available options for update of this basic data.
As with nearly all programs the following also applies here:
Field with firmly defined selection options
Default 1200 Baud
Select one of the baud rates offered by clicking onto this field and with a second click choosing the baud rate required.
Field with firmly defined selection options
Select one of the debug levels offered by clicking onto this field and with a second click choosing the debug level required.
The system offers the following debug levels:
Note:
Only enter a value higher than "0" for
the debug level if a communications protocol is required for error analysis.
Details are to be found in file "errlog" in directory work of the appropriate system unit.
Entry range permitted: numeric 1 - 999999
Enter the POS no. in this field. Further information can be found in the device description
Entry range permitted: numeric 1 - 999999
Enter an operator no. in this field. Further information can be found in the device description.
Entry range permitted: numeric 1 - 999999
Default = 180
Default = 50
Entry range permitted: numeric 1 - 999999
Default = 8000
Entry range permitted: numeric 1 - 9
Default = 1
The value entered here should be higher than 0, i.e. 1. The appropriate Payment type, category EFT must also have been programmed and it must be identical with the usage code entered here.
Entry range permitted: numeric 1 - 999
The code for the domestic currency must be entered in this field. The default is 56 for BEF (Belgian Franc).
The following values are permitted:
Entry range permitted: numeric 1 - 9
Default = 0
Enter the number of decimal places.
Switch active: The
terminal sends the set currency code
Switch deactivated: The terminal
does not send a currency code