The program description
deals with the following:
Data for the Desko magnetic
card reader can be updated, i.e. created, changed or deleted, with this
program. Data which has already been stored can be displayed.
The interface and
assignment to a processing unit must be defined and the device-specific
operating mode set.
This device is a multi card
reader which can read the following magnetic cards:
·
OCR
reader for passport and travel documents
·
Magnetic
track reader for all magnetic track credit and customer cards
·
Barcode
reader for 1D and 2D barcodes, e.g. 29, 2 out of 5, IATA, Code 128.
Click on the
graphic for further help with setting up a Duty-Free
system.
All options available for
update of the basic data have been described
below.
As with nearly all programs
the following also applies here:
Field with firmly
defined selection options
Select one of the debug
levels offered by clicking on this field and with a second click selecting the
level required.
The system offers the
following:
Note:
Only select a
value higher than "0" for the debug level if a protocol of the
communication of the Desko magnetic card reader is required for error analysis.
The information is shown in file "errlog" in directory work
of the appropriate system unit.
Entry range permitted:
numeric, 0 - 9
Enter the number in this
field.
Button activated: The card reader is also used to
read passenger boarding cards.
Button deactivated: The card reader is not used to read passenger boarding cards.
Use of this
function depends on operating mode Duty-Free being set and that the option Bordkartenleser has been set
in program Application -> Organsiation -> Terminals -> Terminaltype
-> Add.data 1.
Click on the
graphic for further information on setting up a Duty-Free
system.