The program description deals with the following:
Update basic data, i.e. programming, changing or clearing, is possible with this program. Data which has already been stored can be displayed for information.
A drinks dispenser of type Hartek can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can be displayed for information.
The interface and link to a processing unit should be defined and the device-specific operation mode of the drinks dispenser set.
Drinks dispensers can work in two different ways, i.e. self-service and supervised dispensing.
Click
onto graphic to obtain further help with programming of drink dispensers.
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Field with firmly defined selection options
Select one of the debug levels offered by clicking onto this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol for communication of the drinks dispensers is
required for error analysis. The details are shown in file "errlog"
in directory work
of the appropriate system unit.
Field with firmly defined selection options
Select one of the offered baud rates by clicking onto this field and with a second click confirming the selection.
The system offers the following baud rates:
Please note that the baud rate must match up to the setting of the connected drinks dispenser.
Default =1000
Default = 8000
Default = 1
Switch active: The connected drinks dispenser operates in mode "Self-service"
Switch deactivated: The connected drinks dispenser operates in mode "Supervised dispensing"