The program description deals with the following:
The data for connection of a scanner type Passport reader can be updated, i.e. created, changed or deleted, with this program. Data which has already been stored can also be displayed
The TCP/IP no. and the link to a processing unit should be defined and the device-specific operation mode of the scanner set.
This scanner is part of the duty-free system configuration and is used to scan the passports of non-European citizens. Further parametering in the duty-free system is necessary before this device can be operated.
Click on the graphic for further help with setting up a Duty-free system.
All options available for update of the basic data have been described below.
As with nearly all programs the following also applies here:
Field with firmly defined selection options
Select one of the offered debug levels by clicking on this field and with a second click selecting the level required.
The system offers the following:
Note:
Only select a value higher than "0" for
the debug level if a protocol for communication of the terminal is necessary for
error analysis. Data is shown in file "errlog" in directory work
of the appropriate system unit.
Entry range permitted: numeric, 99999999999999
Enter the IP no. in this field.
Default = 0
Enter a number to identify the terminal.
Field with firmly defined selection options
Select one of the offered options by clicking on this field and with a second click confirming the option selected.
The system offers the following:
Button activated: The
pictures are stored in a high resolution format.
Button deactivated: The pictures are stored in low resolution format.
Button activated: The
pictures are stored in colour
Button deactivated: The pictures are stored monochrome.