Drink dispenser WMF Hogatron (ADS)
The program description deals with the following:
- Remarks on Program function
- Remarks on Data fields
- Use Index to find the field details required
Note:
Please note that this drinks dispenser can also
communicate with the MICROS Retail OSCAR POS application via the E protocol. In this case,
dispenser type WMF Hogatron
(E-Prot) should be set in update program Devices.
Remarks on program function
The data for connection of a drinks dispenser type WMF Hogatron (ADS) can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.
The interface and link to a processing unit must be defined and the device-specific operating mode of the drinks dispenser set.
Drinks dispensers can be used in two different ways, i.e. self-service and in supervised dispensing mode (credit-debit mode).
Click
on the graphic to obtain further help with programming of drink dispensers.
Remarks on data fields
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
- The entry mask for this program may differ in your MICROS Retail OSCAR POS program. Some data fields may be missing.
- There may be defaults or firmly defined selection options for some data fields. These cannot be updated in the current program.
- Fields with enforced entry defined are to be found in the entry masks as are fields where entry is optional.
- If the data record is updated over several pages of entry masks, the dialog window is reached by clicking onto the appropriate button with <Mouse key 1>.
- The same procedure also applies to call up of another update program from this program.
- In some cases you may find so-called "Switches" which can be activated or deactivated by the user with <Mouse key 1>, depending on the setting. Activated switches have a dark top, deactivated switches are lighter.
Debug
Field with firmly defined selection options
Select one of the offered debug levels by clicking onto this field and with a second click confirming the selection.
The system offers the following debug levels:
- 0 = no protocol of the data communication in file "errlog"
- 1 =
- 2 =
- 3 = display of all communications data in file "errlog"
Note:
Only select a value higher than "0" for
the debug level if a protocol of communication of drinks dispenser is required
for error analysis. The details are shown in file "errlog" in
directory work of
the appropriate system unit.
Baudrate
Field with firmly defined selection options
Select one of the offered baud rates by clicking onto this field and with a second click confirming the selection.
The system offers the following baud rates:
- 2400 =
- 4800 =
- 9600 = default
- 19200 =
Please note that the baud rate set must match up with the setting of the connected drinks dispenser.
Poll timeout
Default =1000
Request timeout
Default = 8000
Usage
Default = 1
Self service
Switch active: The connected drinks dispenser operates in mode Self service.
Switch deactivated: The connected drinks dispenser operates in mode Supervised dispensing (credit-debit mode)
Index
Salzufer 8
D-10587 Berlin