The program description deals with the following:
Note:
Please note that this drinks dispenser can also
commmunicate with the MICROS Retail OSCAR POS application via the ADS protocol. In such a
case, the dispenser type WMF
Hogatron (E-Prot) should be set in update program Device.
Data for connection of a drinks dispenser, type WMF-Hogatron (E-Prot), can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.
The interface and link to a processing unit must be defined and the device-specific operating mode of the drinks dispenser set.
Drinks dispensers can be used in two different modes: self service and supervised dispensing. (credit debit).
Click on the graphic for further help with programming Drink dispenser .
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Field with firmly defined selection options
Select one of the offered debug levels by clicking on this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol for communciation of the drinks dispenser is
required for error analysis. The details are shown in file "errlog"
in directory work
of the appropriate system unit.
Field with firmly defined selection options
Select one of the offered baud rates by clicking on this field and with a second click confirming the selection.
The system offers the following baud rates:
Please ensure that the baud rate matches up with the setting for the connected drinks dispenser.
Default =1000 milliseconds
Default = 3000 milliseconds
Default = 600 milliseconds
Default = 200 milliseconds
Default = 1
Switch active: The
PLU nos. are converted using a table in the drinks dispenser
Switch deactivated: The PLU nos.
are converted using the drinks dispenser table in the MICROS Retail OSCAR POS application
Switch active:
E-protocol with check sum
Switch deactivated: E-protocol
without check sum
Switch active:
Interface 1 of the ISB box (intelligent interface box) is used
Switch deactivated: Interface 1
of the ISB box is not used
If this interface is used, the items will have to be converted to numbers 1001 to 1999 of the device article (see upate program Device item group).
Switch active:
Interface 2 of the ISB box (intelligent interface box) is used
Switch deactivated: Interface 2
of the ISB box is not used
If this interface is used, the items will have to be converted to numbers 2001 to 2999 of the device article (see upate program Device item group).
Switch active:
Interface 3 of the ISB box (intelligent interface box) is used
Switch deactivated: Interface 3
of the ISB box is not used
If this interface is used, the items will have to be converted to numbers 3001 to 3999 of the device article (see upate program Device item group).
Switch active:
Interface 4 of the ISB box (intelligent interface box) is used
Switch deactivated: Interface 4
of the ISB box is not used
If this interface is used, the items will have to be converted to numbers 4001 to 4999 of the device article (see upate program Device item group).
Switch active: Interface
5 of the ISB box (intelligent interface box) is used
Switch deactivated: Interface 5
of the ISB box is not used
If this interface is used, the items will have to be converted to numbers 5001 to 5999 of the device article (see upate program Device item group).
Switch active:
Interface 6 of the ISB box (intelligent interface box) is used
Switch deactivated: Interface 6
of the ISB box is not used
If this interface is used, the items will have to be converted to numbers 6001 to 6999 of the device article (see upate program Device item group).
Switch active:
Interface 7 of the ISB box (intelligent interface box) is used
Switch deactivated: Interface 7
of the ISB box is not used
If this interface is used, the items will have to be converted to numbers 7001 to 7999 of the device article (see upate program Device item group).
Switch active:
Interface 8 of the ISB box (intelligent interface box) is used
Switch deactivated: Interface 8
of the ISB box is not used
If this interface is used, the items will have to be converted to numbers 8001 to 8999 of the device article (see upate program Device item group).