The program description deals with the following:
The data for connection of a payment terminal, type ICL EFT can be updated, i.e. programmed, changed or cleared, with this program. Data which already exists can also be displayed for information.
The interface and the link to a processing unit should be defined and the device-specific operating mode of the EFT terminal set.
Payment terminals are needed for payment by magnetic stripe cards. Other parametering is necessary to operate this device, e.g. the appropriate Payment type with link of the correct Credit card etc.
The following description deals with all options available for update of this basic data.
As with nearly all other programs the following also applies here:
Field with firmly defined selection options
Select one of the offered debug levels by clicking onto this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol of communication with the payment terminal is
required for error analysis. The details are shown in file "errlog"
in directory work
of the appropriate system unit.
Field with firmly defined selection options
Select one of the offered baud rates by clicking onto this field and with a second click confirming the selection.
The system offers the following baud rates:
Please note that the baud rate permitted must match up to the setting of the device connected.
Entry range permitted: numeric
Enter the POS no. in this field. Further information can be found in the device description.
Entry range permitted: numeric
Enter the operator no. in this field. Further information can be found in the device description.
Entry range permitted: numeric
Entry range permitted: alphanumeric max. 7 chars.
Entry range permitted: numeric
Default = 500 milliseconds
Entry range permitted: numeric
Default = 3000 milliseconds
Entry range permitted: numeric
Default = 60000 milliseconds
Entry range permitted: numeric
Default = 8000 milliseconds
Entry range permitted: numeric
Default = 1
Enter the number of the terminal. The value entered must match up to the value entered under the appropriate payment type, i.e. the terminal no. entered in program Payment type will be chosen.