The program description deals with the following:
A device of type IMC display (DP60-2x) can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information. The interface and link to a processing unit should also be defined and the device-specific operating type set.
Note:
IMC devices can only be operated if
interface board IMC 70 is installed for connection of this device.
Control for status LED of the display is not supported by the MICROS Retail OSCAR POS program. Not all characters of Windows code page 1152 are supported due to the firmware.
More information on the installation and configuration of the IMC 70 interface boards can be obtained from Documentation IMC 70.
The following description deals with all options available for update of this basic data.
As with nearly all other programs the following also applies here:
Path and name of DLL file for the device driver of IMC devices
..\bin\ is the standard setting in the MICROS Retail OSCAR POS directory. The entry in this field should read ../bin/imc1_87.dll.
Field with firmly defined selection options
Select one of the offered debug levels by clicking onto this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol for communication of the display is required for
error analysis. The details can be found in file "errlog" in
directory work of
the appropriate system unit.
Field with firmly defined selection options
Select one of the 8 display types offered (4 operator displays and 4 customer displays) by clicking onto this field and with a second click confirming the selection.
The system offers the following types of display:
Entry range permitted: numeric 1 - 2
Enter the number for usage of the display in this is field.