IMC Devices
For
the operation of IMC devices, the interface card IMC 70 must be installed in
the system unit and configured as follows:
- In the directory ..\bin\ of the MICROS Retail OSCAR POS application, the IO address for
the interface card must be set up correctly in the file "AdsImc70.inf". The default value
is 1120 but it can be changed into 1220 or 1320 if necessary.
- Install the system driver by selecting the file
"AdsIm70.inf" and
chosing the command Install in the context menu.
- End and restart the operating system to activate
the IMC 70 driver.
After
a successful installation and configuration of the interface card IMC 70, you
can configure the IMC devices in the MICROS Retail OSCAR POS application. All of the devices
mentioned in the following are to be assigned to the interface /dev/adsimc70 in the update program Device.
This interface must be configured in the update program Interface Type as follows:
- Device Interface = 98 (free number)
- Descriptor = IMC 70
- Device Name = /dev/adsimc70
The following IMC devices can be connected to the interface card IMC
70:
MICROS Retail Deutschland GmbH
Salzufer 8
D-10587 Berlin
Germany