OPOS drawer
The program description
deals with the following:
- Remarks on Program
function
- Remarks on Data fields
- Use Index to find the
field details required
Remarks on
program function
The data for an OPOS drawer
can be updated, i.e. programmed, changed or cleared, with this program. Data
which has already been stored can also be displayed for information.
Enter the number of the
device under which it is to be stored in the system. The interface and link to
a processing unit should also be defined and the device-specific operating mode
set.
Note:
99 = zero should be selected as device interface for all OPOS devices.
The OPOS modules must have
been installed and configured if OPOS devices are to be operated.
Click on the graphic for
further help with programming of OPOS Devices.
Remarks
on data fields
The following description
deals with all available options for update of this basic data.
As with nearly all other
programs the following also applies here:
- The entry
mask for this program may differ in your MICROS Retail OSCAR POS program. Some data fields may be missing.
- There may be defaults or firmly defined
selection options for some data fields. These cannot be updated in the
current program.
- Fields with enforced entry defined are to
be found in the entry masks as are fields where entry is optional.
- If the data record is updated over several
pages of entry masks, the dialog window
is reached by clicking onto the appropriate button with <Mouse key
1>.
- The same procedure also applies to call up
of another update program from this program.
- In some cases you may find so-called
"Switches" which are activated or deactivated by the user with
<Mouse key 1>, depending on the setting. Activated switches have a
dark top, deactivated switches are lighter.
Service name
Entry range permitted:
alphanumeric max. 30 chars.
Note
The entry in this field is option and only necessary if no entry has been
made in field Device name.
Example:
The OPOS modules are entered as follows in the registration database:
·
HKEY_LOCAL_MACHINE\SOFTWARE\OLEforRetail\
ServiceOPOS\Gerätegruppe\Gerätename\
The service
names are listed in program regedit:
The
device names can be found in the left-hand directory in the device group for
the device concerned, e.g. "ADSTopCAshCentralLock".
The
linked service names can be found in the right-hand directory under code "Standard" = "ADSTopCash.CentralLock.1".
Click on the
graphic for further help with programming of OPOS Devices.
Device name
Entry range permitted:
alphanumeric max. 30 chars.
Enter the device name of
this OPOS device.
Exmple
The OPOS modules are entered as follows in the registration database:
·
HKEY_LOCAL_MACHINE\SOFTWARE\OLEforRetail\
ServiceOPOS\Gerätegruppe\Gerätename
The device names are listed
in program regedit.
The
linked device names can be found in the left-hand directory under the device
group concerned.
Click on the graphic for
further help with programming of OPOS Devices.
Debug
Entry range permitted:
numeric 0 - 255
Select one of the offered
debug levels by clicking onto this field and with a second click confirming the
selection.
The system offers the
following debug levels:
- 0 = no protocol of data communication in
file "errlog"
- 1 =
- 2 =
- 3 = display of all communication data in
file "errlog"
Note:
Only select a value
higher than "0" for the debug level if a protocol of communications is
required for error analysis. The details are shown in file "errlog"
in directory work
of the appropriate system unit.
Usage
Entry range permitted:
numeric 0 - 9
Enter the number of the
drawer to be used. The value entered here must correspond to the entry in Operator and in the appropriate payment mode, i.e.
the drawer no. entered in program Operator and Payment type will be selected.
Multithreaded
Button active: Multithreaded is switched on
Button deactivated: Multithreaded is switched off
This option is dependent on
the connected device and must be activated or deactivated accordingly.
Index
Salzufer 8
D-10587 Berlin