The program description deals with the following:
The data for a EFT Pt10 payment terminal can be updated, i.e. created, changed or deleted, with this program. Data which has already been stored can also be displayed.
All options available for update of the basic data have been described below.
As with nearly all programs the following also applies here:
Field with firmly defined selection options
Select one of the offered debug levels by clicking on this field and with a second click selecting the level required.
The system offers the following:
Note:
Only select a value higher than "0" for
the debug level if a protocol for communication of the terminal is necessary
for error analysis.
Field with firmly defined selection options
Select the language offered by clicking on this field and with a second click confirming the language.
The system offers the following:
Entry range permitted: numeric, 0 - 9
Enter a value to specify the number of decimal digits.
Default = 2
Entry range permitted: numeric, 1 - 99999
Enter a value to specify the time duration for the data timeout.
default = 2000 Milliseconds
Field with firmly defined selection options
Select one of the baud rates offered by clicking onto the field and with a second click confirming the selection.
The system offers the following baud rates:
Please note that the baud rate permitted must match up to the setting of the connected Pt10 EFT device.
.
Field with firmly defined selection options
Select one of the bit sizes offered by clicking onto the field and with a second click confirming the selection.
The system offers the following bit sizes:
Field with firmly defined selection options
Select one of the parity options offered by clicking onto the field and with a second click confirming the selection.
The system offers the following parity options:
Field with firmly defined selection options
Select one of the stop bit options offered by clicking onto the field and with a second click confirming the selection.
The system offers the following stop bit options: