The program description deals with the following:
The data for printer type RS65P2D can be updated, i.e. programmed, changed or cleared, with this program. Data which already exists can also be displayed for information.
The interface and link to a processing unit should be defined and the device-specific operating mode of the printer set.
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Entry range permitted: numeric 0 - 2
Enter the number of drawers connected. Entry "0" implies that no drawer is connected.
Field with firmly defined selection options
Select one of the offered debug levels by clicking on this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol for communication of the payment terminal is required
for error analysis. The details are shown in file "errlog" in
directory work of
the appropriate system unit.
Default 10
The number of lines the receipt is to advance after the last printed line and before the receipt is cut off is entered here.
Default 24
The number of characters to be printed per line.
Field with firmly defined selection options
Select one of the offered baud rates by clicking on this field and with a second click confirming the selection.
The system offers the following baud rates:
Please ensure that the baud rate set matches up with the connected printer.
Default 100
Enter a value in milliseconds to define how long the release magnet of the connected drawer is to remain active.
Entry range permitted: numeric min. 2000
Enter a value in milliseconds to define the intervals at which the status of the printer is to be called up. An error message is sent if the response is negative.
Entry range permitted: numeric min. 1000
Enter a value in milliseconds to define the intervals at which the printer is to respond after a status query. Printer offline appears if the response is negative.
Field with firmly defined selection options
Select one of the offered options by clicking on this field and with a second click confirming the selection.
The system offers the following:
Entry range permitted: numeric 0 - 9
Enter a drawer no. in this field if drawer 1 is to be connected to this printer and if this is to open as defined in Operator and Payment type. If 2 drawers are connected, the second drawer is given the value +1. This value must match up to the entries in Operator and the appropriate parameter of the payment type.