Virtual display

The program description deals with the following:

Remarks on program function

The data for configuration of a virtual display can be updated, i.e. created, changed or deleted, with this program. Data which has already been stored can also be displayed.  

The interface and link to an interface, processing unit should be defined and the device-specific operating mode of the printer set.

Note:

Virtual devices are only intended for test purposes if connection of devices is not possible for whatever reason. Java 1.4 or newer versions should be installed if virtual devices (printer, display, drawer, lock or EFT) are to be tested.

 

 

A device interface,type IP address should be configured and the device name, the local IP no. (localhost) and the port no. (5440) (locahost:5440) entered. In this example 5442 should be used as port no. for the virtual display.


Remarks on data fields

All options available for update of the basic data have been described below.

As with nearly all programs the following also applies here:


Debug

Field with firmly defined selection options

Select one of the offered debug levels by clicking on this field and with a second click selecting the level required. 

The system offers the following:

Note:
Only select a value higher than "0" for the debug level if a protocol for communication of the terminal is necessary for error analysis.


Portnumber

Entry range permitted: numeric, 1 - 99999

Enter the port no. of the virtual display.

 

Example:
"locahost:5440" should be entered for the interface type IP address. Port no. 5442 should be entered in this example for the virtual display.


Columns

Default 32      

An entry here defines the number of characters per line which are to appear on the virtual display.


Lines

Default 32

A value entered here defines the number of lines which are to appear on the virtual display.


Usage

Field with firmly defined selection options

Select one of the operating modes offered for use on the virtual display by clicking on this field and with a second click confirming the option selected.

The system offers the following:


Conversion

Select whether a conversion upper/lower case is to be carried out on the display. Select the option required by clicking on this field and then clicking again to confirm the selected option.

The system offers the following:


Cursor LEDs

Field with firmly defined selection options

Choose whether the Status LEDs are to be shown on the bottom line of the display. The option is selected with a click on the field and a second click to confirm the option required.

The system offers the following:


Start scroll area

Entry range permitted: numeric, 1 - 99

Enter a number to identify the line to be used for the start of the scroll area.


End scroll area

Entry range permitted: numeric, 1 - 99

Enter a number to identify the line to be used for the end of the scroll area. The value here must be higher than the value for the start scroll area. 


Index


MICROS Retail Deutschland GmbH
Salzufer 8
D-10587 Berlin