Virtual EFT

The program description deals with the following:

Remarks on Program function
Remarks on Data fields
Use the Index to find the field explanation required

Remarks on program function

The data for configuration of a virtual EFT can be updated, i.e. created, changed or deleted, with the program. Data which has already been stored can also be displayed.

The interface and link to an interface, processing unit should be defined and the device-specific operating mode of the device set.

Note:

Virtual devices are only intended for test purposes if connection of devices is not possible for whatever reason. Java 1.4 or newer versions should be installed if virtual devices (printer, display, drawer, lock, scanner or EFT) are to be tested.

A device interface type IP address should be configured and the device name, the local IP no. (localhost) and the port no. (5440) (locahost:5440) entered. In this example 5452 should be used as the port no. for the virtual EFT.

Remarks on data fields

All options available for update of the basic data have been described below.

As with nearly all programs the following also applies here:

The entry mask in the application program may differ for this program. Some data fields may be missing
There may be some defaults or firmly defined selection options for some data fields. These cannot be updated in the current program.
The entry mask contains fields where entry is optional and fields with enforced entry defined.
If the data record is updated over several pages of entry masks, the dialog window is reached by clicking onto the appropriate button with <Mouse key 1>.
The same procedure also applies to call-up of another update program from this program.
In some cases, you may find so-called "Switches" which are activated or deactivated by the user with <Mouse key 1> depending on the setting. Activated switches have a dark top, deactivated switches are lighter..