The program description deals with the following:
The data for connection of a payment terminal, type Telepas EFT, can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.
The interface and link to a processing unit should be defined and the device-specific operating mode of the EFT terminal set.
Payment terminal devices are required for handling payments by magnetic cards. Additional parameterings are necessary in, for example, the appropriate Payment type with link of the correct Credit card etc..
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Field with firmly defined selection options
Select one of the offered debug levels by clicking on this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol for communication of the payment terminal is
required for error analysis. The details are shown in file "errlog"
in directory work
of the appropriate system unit.
Entry range permitted: numeric
Default = 2000 milliseconds
Entry range permitted: numeric
Default = 60000 milliseconds
Entry range permitted: numeric
Default = 2000 milliseconds
Field with firmly defined selection options
Select one of the offered baud rates by clicking on this field and with a second click confirming the selection.
The system offers the following baud rates:
Default = 1
Enter the terminal ID no.. The value entered here must match up with the one defined in the appropriate payment type, i.e. the terminal whose no. is entered in program Payment type will be selected.