The program description is divided up as follows:
The data for connection of a payment terminal, type Thales can be updated, i.e. created, changed or deleted, with this program. Data which has already been stored can also be displayed.
The interface and link to a processing unit must be defined and the device-specific operating mode of the EFT terminal set.
Please note:
Payment terminal devices are required if
payments are to be made with magnetic cards. Further parametering is necessary,
e.g. an appropriate Payment
type with link to the appropriate Credit card
etc. if this device is to be operated.
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Field with firmly defined selection options
Select one of the debug levels offered by clicking on this field and with a second click confirming the option required.
The system offers the following debug levels:
Please note:
Only select a value higher than "0" for the debug level if a record of the EFT device
communication is required for error analysis. The record appears in file
"errlog" in directory work of the appropriate system
unit.
Field with firmly defined selection options
Select one of the baud rates offered by clicking on this field and with a second click confirming the option required.
The system offers the following baud rate:
Entry range permitted: numeric 1 - 999999999
Enter the number of the terminal in this field.
Entry range permitted: alphanumeric max. 6 pos.
Entry range permitted: alphanumeric max. 20 pos.
Entry range permitted: numeric 1 - 999999999
Enter a value for the print width of the voucher printer for this terminal.
Default = 40 pos.
Entry range permitted: numeric
Default = 60 milliseconds
Entry range permitted: numeric 0 - 1
Enter the number of the terminal in this field. The value entered here must be the same as the entry in the appropriate payment type, i.e. the payment terminal defined in program Payment type will be selected.
Default = 1
Button active:
Button deactivated:
Button active:
Button deactivated: