Drinks dispenser (Walla TBT)
The program description deals with the following:
- Remarks on Program function
- Remarks on Data fields
- Use the Index to find the field explanation required
Remarks on program function
Data for a drinks dispenser type Walla TBT can be updated, i.e. created, changed or deleted, with thsi program. Data which has already been stored can also be displayed.
The interface and link to a processing unit should be defined and the device-specific operating mode of the drinks dispenser set.
Drinks dispensers can be operated in two ways: self-service and supervised dispensing.
Click on the
graphic for further help with setting up Drinks
dispensers.
Remarks on data fields
All options available for update of the basic data have been described below.
As with nearly all programs the following also applies here:
- The entry mask in the application program may differ for this program. Some data fields may be missing
- There may be some defaults or firmly defined selection options for some data fields. These cannot be updated in the current program.
- The entry mask contains fields where entry is optional and fields with enforced entry defined.
- If the data record is updated over several pages of entry masks, the dialog window is reached by clicking onto the appropriate button with <Mouse key 1>.
- The same procedure also applies to call-up of another update program from this program.
- In some cases, you may find so-called "Switches" which are activated or deactivated by the user with <Mouse key 1> depending on the setting. Activated switches have a dark top, deactivated switches are lighter.
Debug
Field with firmly defined selection options
Select one of the debug levels offered by clicking on this field and with a second click confirming the option selected.
The system offers the following:
- 0 = no protocol of data communication in file "errlog"
- 1 =
- 2 =
- 3 = all communication data in file "errlog"
Notes:
Only select a value higher than "0" for
the debug level if a protocol of the communication of the drinks dispenser is
required for error analysis. Information can be found in file
"errlog" in directory work of the appropriate system
unit.
Baudrate
Field with firmly defined selection options
Select one of the offered baud rates by clicking on this field and with a second click confirming the option required.
The system offers the following:
- 1200 = Default
- 2400 =
- 4800 =
- 9600 =
Please note that the permitted baud rate must match the setting of the connected drinks dispenser.
Selfservice
Select one of the operating modes offered by clicking on the field and with a second click confirming the option required.
The system offers the following:
- On= The drinks dispenser operates in mode "Selfservice".
- Off = The drinks dispenser operates in mode "Supervised dispensing".
Click on the
graphic for further help with setting up Drinks
dispensers.
Station
Field with firmly defined selection options
Select one of the stations offered by clicking on this field and with a second click confirming the option required.
The system offers the following:
- 1 to 9
Poll timeout
Default =1
Request timeout
Default = 1
Index
Salzufer 8
D-10587 Berlin