The program description deals with the following:
The data for a drinks dispenser of type Walla VS can be updated, i.e. created, changed or deleted, with this program. Data which has already been stored can also be displayed.
The interface and link to a processing unit must be defined and the device-specific operating mode of the drinks dispenser set.
Drinks dispensers can be operated in two ways: self-service and supervised dispensing.
Click on the graphic for further help with setting up Drinks dispensers.
All options available for update of the basic data have been described below.
As with nearly all programs the following also applies here:
Field with firmly defined selection options
Select one of the debug levels offered by clicking on this field and with a second click confirming the option selected.
The system offers the following:
Notes:
Only select a value higher than "0" for
the debug level if a protocol of the communication of the drinks dispenser is
required for error analysis. Information can be found in file
"errlog" in directory work of the appropriate system
unit.
Field with firmly defined selection options
Select one of the offered baud rates by clicking on this field and with a second click confirming the option required.
The system offers the following:
Please note that the permitted baud rate must match the setting of the connected drinks dispenser.
Default = 500 milliseconds
Default = 2000
Default = 5
Button activated:
Button deactivated: