SafePay device configuration

SafePay is a complete system for cash and automated coin and note counting at the terminal. A drawer is no longer necessary. SafePay accepts cash from the customer and calculates the change. The cashier only needs to insert notes into the bank note module. The coin module is operated by the customer only.

The following parameters must be set in MICROS Retail OSCAR POS for SafePay device configuration:

• SafePay device
  The SafePay device is configured in program System -> Devices -> Misc. -> SafePay. Hardware from the "Gunnebo" company is supporte.
• Payment type
  The category "CasGuard" and the appropriate ISO currency code must be linked for the Payment types in program Parameter -> Payment -> Payment type for the SafePay device (= 978 for EUR, 208 for DKK, 578 for NOK or 752 for SEK).
  Thie options "AT enforced" und "Change enforced" must be deactivated in program Parameters -> Payments -> Paymenttype -> Payment parameter to ensure that if the amount tendered exceeds the purchase total change can be calculated and the payment operation can be ended automatically.
• Operator SafePay menus
  A Text group of type "Text for SafePay" can be defined in field SafePay function in program Application -> Employee ->Operator ->Details 1 to ensure that a menu can be called up by the operator at the terminal for the SafePay functions with key event <SPFUNC>.
  The texts of the text group must match the number of functions in the function list for the SafePay device (see SafePay functions list).
• CGStatusSubForm
  The form field must be made visible in program System-> User interface -> Form field for the appropriate terminal program (SalesT3, SalesT2 etc.). This is achieved by changing the default from "Off" to "On". This field is then used to display the amount of money in the Safepay device in the terminal program.

---

SafePay functions list

The functions described below can be entered as text nos. in a text group and can be linked to the operator in field SafePay menu. Most Safepay functions are called up automatically by the POS program and should not be visible in the operator menu. This menu is called up at the terminal with key event <SPFUNC>.

No.	Function	Information
2	check status
3	status request
4	LOGIN
5	LOGOUT
6	protocolstartV
7	protocolstop
8	GetCurrencyInfo
9	Notetransfer to safety	Note: Cannot be called up via menu, but should only be possible with key event <SpnoteTransfer>, <SpnoteTransfern> or <fSPnoteTransfer> if the related keys are on the keyboard.
10	Notetransfer to safety, mode 1
11	Notetransfer to safety, mode 2
12	End PayIn	Note: Cannot be called up via menu.
13	start float entry
20	Message (output to errlog)
21	getCurrencyUnitInfo (output to receipt)
22	getCashCount - current currency (output to receipt)
31	openCover 1	Note: Cannot be called up via menu, but call up should only be possible via key event <fSP> <openCover> or <SpopenCover>.
32	openCover 2
33	openCover 3
40	latch casette 0	Note: Cannot be called up via menu, but call up should only be possible via key events <fSPlatchCasetten>, <SplatchCasetten>, <fSPreleaseCasetten> and <SpreleaseCasetten>.
41	relase casette 0
42	latch casette 1
43	release casette 1
50	Force note as 5	Note: Cannot be called up via menu, but call up should only be possible via key events <fSPforceNoteAs> or <FORCENOTEASn>.
51	Force note as 10
52	Force note as 20
53	Force note as 50
54	Force note as 100
55	Force note as 200
56	Force note as 500
60	Switch currency to EUR	Note: Cannot be called up via menu, but call up should only be possible via key events <fPM>, <PM>.
61	Switch currency to DKK
62	Switch currency to NOK
63	Switch currency to SEK
70	Logging start	Note: Starting and stopping the SafePay hardware.
71	Logging stop
80	End receipt	Cannot be called up by operator via menu
81	Restart safepay .	Note: Can also be called up with key event <Spreset>
90	getCashCount - EUR	Cash report for currency types
91	getCashCount - DKK
92	getCashCount - NOK
93	getCashCount - SEK

---

FSM function

The following key events can be called up by the operator at the POS:

FSM group	Event name	Description of function
	SPFUNC	Start of SafePay function menu. The functions must be stored as texts in the text group (4400 to 4499) and must be linked to an operator.
	SPFUNCn	Start of a SafePay function.
	fSPlatchCasette	Lock down cash cassette
	SplatchCasetten
	fSPreleaseCasette	Release cash cassette.
	SPreleaseCasetten
	SPnoteTransfern	Transport of bank notes in the cassette.
	fSPnoteTransfer
	SPreset	Restart of a Safepay device.
	fSPopenCover	Opening of SafePay device (1,2 or 3, 1 is upper lid)
	SPcheck	Status information
	fSPforceNoteAs	Link an unread bank note.
	FORCENOTEASn

---

MICROS Retail Deutschland GmbH
Salzufer 8
D-10587 Berlin