The program description deals with the following:
The data for connection of a SafePay system can be updated, i.e. created, changed or deleted, with this program. Data which has already been stored can also be displayed.
The interface and link to a processing unit must be defined and the device-specific operating mode of the Safepay system set.
SafePay is a closed system for automated coin and bank note counting at the terminal. A cash drawer is no longer necessary. SafePay accepts cash from the customer and calculates the change due. The cashier only needs to operate the bank note module where the notes are deposited. The coin module is operated by the customer.
With SafePay the fill-up and count operations for the cash drawer are no longer necessary and this speeds up terminal initialisation and terminal report. SafePay takes up to 20 unsorted coins simultaneously. The customer can pay quickly with coins during the scanning operation. Coins and notes stored in SafePay can be used again by the system as float.
Click on the graphic for further information on
setting up a SafePay device.
All options available for update of the basic data have been described below.
As with nearly all programs the following also applies here:
Entry range permitted: numeric, 1 - 3
Only select a value higher than "0" for the debug level if a protocol for communication of the terminal is necessary for error analysis. Data is shown in file "errlog" in directory work of the appropriate system unit.
The system offers the following:
Default = 3
Entry range permitted: alphanumeric, max. 20 chars.
Default = arq
Entry range permitted: alphanumeric, max. 20 chars.
Default = rs232
Entry range permitted: alphanumeric, max. 20 chars.
Default = 0
Entry range permitted: alphanumeric, max. 20 chars.
Default =
Entry range permitted: alphanumeric, max. 20 chars.
Default = EUR