Go to main content

Oracle® Server X7-2L Service Manual

Exit Print View

Updated: October 2019

Remove the Battery

  1. Prepare the server for service.
    1. Power off the server and disconnect the power cords from the server power supplies.

      See Powering Down the Server.

    2. Extend the server into the maintenance position.

      See Extend the Server to the Maintenance Position.

    3. Attach an antistatic wrist strap to your wrist, and then to a metal area on the chassis.

      See Take Antistatic Measures.

    4. Remove the server top cover.

      See Remove the Server Top Cover.

  2. To dislodge the battery from its retainer, use your finger to gently push the top edge of the battery away from the retainer.

    Note -  To gain access to the battery, you might need to disconnect and move aside the auxiliary signal cable to the disk backplane and the SAS cables to the Internal HBA. For more information, see Servicing the Disk Backplane (FRU) and Servicing SAS Cables (FRU).

    image:Figure showing how to remove the system battery.
  3. Lift the battery up and out of its retainer.

Related Information