ok show-nets a) /niu@480/network@0 b) /pci@400/pci@2/pci@0/pci@c/network@0,3 c) /pci@400/pci@2/pci@0/pci@c/network@0,2 d) /pci@400/pci@2/pci@0/pci@c/network@0,1 e) /pci@400/pci@2/pci@0/pci@c/network@0 f) /pci@400/pci@2/pci@0/pci@a/network@0,1 g) /pci@400/pci@2/pci@0/pci@a/network@0 q) NO SELECTION Enter Selection, q to quit: q
These examples assume that /pci@400/pci@2/pci@0/pci@c/network@0 is a port on the adapter.
ok cd /pci@400/pci@2/pci@0/pci@c/network@0
ok .properties
The output should be similar to this:
vf-assigned-addresses c3050000 00000041 01010000 00000000 00010000 c3050003 00000041 01210000 00000000 00004000 assigned-addresses c3050010 00000041 00000000 00000000 01000000 c305001c 00000041 01000000 00000000 00008000 82050030 00000000 00200000 00000000 00080000 vf-reg 43050000 00000000 00000000 00000000 00010000 43050003 00000000 00000000 00000000 00004000 reg 00050000 00000000 00000000 00000000 00000000 43050010 00000000 00000000 00000000 01000000 4305001c 00000000 00000000 00000000 00008000 02050030 00000000 00000000 00000000 00080000 local-mac-address 3c fd fe 50 00 f0 version Oracle Quad Port 10GBase-T Adapter FCode 3.7 10/18/2016 board-model 7096675 model 7111181/7111182 compatible pciex8086,1589.108e.7b1c.1 pciex8086,1589.108e.7b1c pciex8086,1589.1 pciex8086,1589 pciexclass,020000 pciexclass,0200 address-bits 00000030 max-frame-size 00002400 network-interface-type ethernet device_type network name network fcode-rom-offset 00059c00 vf-stride 00000001 first-vf-offset 00000010 total-vfs 00000020 initial-vfs 00000020 #vfs 00000020 port-type PCIE-Endpoint interrupts 00000001 cache-line-size 00000010 class-code 00020000 subsystem-id 00007b1c subsystem-vendor-id 0000108e revision-id 00000002 device-id 00001589 vendor-id 00008086 {0} ok
If you do not see the device listed, check that the adapter is properly seated. If necessary, reinstall the adapter.
ok device-end