The following figures show a subset of the supported configurations for Oracle ZFS Storage ZS3-4 standalone controllers with four HBAs. To cable the controller to the disk shelves, see Getting Started with Cabling.
Using mixed disk shelves on a controller requires the following:
The controller must use only 4X4 port SAS-2 HBAs
Do not use mixed disk shelves in the same chain
Figure 479 Standalone ZS3-4 controllers with four HBAs connected to two mixed disk shelves in two chains (DE2-24 shown on the left)
Figure 480 Standalone ZS3-4 controllers with four HBAs connected to three mixed disk shelves in three chains (DE2-24 shown on the left)
Figure 481 Standalone ZS3-4 controllers with four HBAs connected to four mixed disk shelves in four chains (DE2-24 shown on the left)
Figure 482 Standalone ZS3-4 controllers with four HBAs connected to five mixed disk shelves in five chains (DE2-24 shown on the left)
Figure 483 Standalone ZS3-4 controllers with four HBAs connected to six mixed disk shelves in six chains (DE2-24 shown on the left)
Figure 484 Standalone ZS3-4 controllers with four HBAs connected to seven mixed disk shelves in seven chains (DE2-24 shown on the top)
Figure 485 Standalone ZS3-4 controllers with four HBAs connected to eight mixed disk shelves in eight chains (DE2-24 shown on the top)
Figure 486 Standalone ZS3-4 controllers with four HBAs connected to multiple mixed disk shelves in eight chains (DE2-24 shown on the top)
Figure 487 Multiple DE2-24 disk shelves in a single chain
Figure 488 Multiple Sun Disk Shelves in a single chain