Go to main content

Oracle® ZFS Storage Appliance Cabling Guide

Exit Print View

Updated: November 2018
 
 

ZS5-4 Clustered to DE3-24 Disk Shelves (3 HBAs)

The following figures show a subset of the supported configurations for Oracle ZFS Storage ZS5-4 clustered controllers with three HBAs. To cable the controller to the disk shelves, see Getting Started with Cabling.


Note -  For port locations, see the hardware overview section for the corresponding controller in Oracle ZFS Storage Appliance Installation Guide.

Figure 30  Clustered ZS5-4 controllers with three HBAs connected to two DE3-24 disk shelves in two chains

image:Graphic showing clustered ZS5-4 controllers with three HBAs                             connected to two DE3-24 disk shelves in two chains

Figure 31  Clustered ZS5-4 controllers with three HBAs connected to three DE3-24 disk shelves in three chains

image:Graphic showing clustered ZS5-4 controllers with three HBAs                             connected to three DE3-24 disk shelves in three chains

Figure 32  Clustered ZS5-4 controllers with three HBAs connected to four DE3-24 disk shelves in four chains

image:Clustered ZS5-4 controllers with three HBAs connected to four                             DE3-24 disk shelves in four chains

Figure 33  Clustered ZS5-4 controllers with three HBAs connected to five DE3-24 disk shelves in five chains

image:Clustered ZS5-4 controllers with three HBAs connected to five                             DE3-24 disk shelves in five chains

Figure 34  Clustered ZS5-4 controllers with three HBAs connected to six DE3-24 disk shelves in six chains

image:Clustered ZS5-4 controllers with three HBAs connected to six DE3-24                             disk shelves in six chains

Figure 35  Multiple disk shelves in a single chain

image:Graphic showing multiple DE3s in the same chain.