Go to main content

Oracle® 6.4 TB NVMe SSD v2 User Guide

Exit Print View

Updated: July 2019
 
 

Component Serviceability

The following service actions can be performed on an Oracle 6.4 TB NVMe SSD v2.

  • Unmount an NVMe storage drive

  • Remove an NVMe storage drive from the server

  • Verify removal of an NVMe storage drive

  • Install an NVMe storage drive in the server

  • Power on an NVMe storage drive and attach a device driver

Refer to the server documentation for additional service information. Late-breaking information and known issues for this product are included in the Oracle 6.4 TB NVMe SSD v2 Product Notes in Oracle 6.4 TB NVMe SSD v2 Product Notes.

Components are either hot serviceable or cold serviceable. Hot-service capability allows you to safely remove this component while the server is running. Cold-service capability requires a powered off state, therefore you need to remove power from the server.

Components are designated either CRU (customer-replaceable unit) or FRU (field-replaceable unit). CRU service capability allows trained technicians and authorized field service personnel to service this component. FRU service capability allows only authorized service personnel to service this component. Oracle 6.4 TB NVMe SSD v2 is a CRU.

The following table lists the serviceability of NVMe components and directs you to replacement instructions.

Component
Serviceability
Replacement Instructions
Oracle 6.4 TB NVMe SSD v2 (and fillers)
Hot
CRU
For instructions on safe installation and removal of SSDs, refer to the server service manual.
Oracle PCIe NVMe Switch Card
Cold
FRU
For instructions on safe installation and removal of cards, refer to the server service manual.
NVMe cables
Cold
FRU
For instructions on safe installation and removal of cables and connected drive backplane, refer to the server service manual.

Related Information