Go to main content

Oracle^® 6.4 TB NVMe SSD v2 Product Notes

Exit Print View

» ...Documentation Home » Oracle Flash Accelerator F640 PCIe Card and ... » Oracle^® 6.4 TB NVMe SSD v2 ... » Oracle 6.4 TB NVMe SSD v2 Product Notes » Implementation Considerations » Oracle Server X7-2 Configuration

Updated: November 2021

Oracle^® 6.4 TB NVMe SSD v2 Product Notes

Document Information

Using This Documentation

Oracle 6.4 TB NVMe SSD v2 Product Notes

Supported Hardware and Software

Supported Servers and Operating Systems

Minimum Supported Oracle 6.4 TB NVMe SSD v2 Firmware Version

Required Host Firmware

Keep Drivers and Firmware Up to Date

Server Management Tools

Implementation Considerations

Oracle Server X8-2 Configuration

Oracle Server X8-2L Configuration

Oracle Server X7-2 Configuration

Oracle Server X7-2L Configuration

SPARC S7-2 Server Configuration

SPARC S7-2L Server Configuration

SPARC T7-1 Server Configuration

SPARC T7-2 Server Configuration

SPARC T7-4 Server Configuration

SPARC T8-1 Server Configuration

SPARC T8-2 Server Configuration

SPARC T8-4 Server Configuration

Upgrading Oracle 3.2 TB NVMe SSD to Oracle 6.4 TB NVMe SSD v2

Replacing a Drive

SSD Volume Management

Accessing Software Updates and Firmware Downloads

Issues Fixed in This Firmware Release

Oracle Linux 8 Update 3, Update 4 Install Fails on Oracle 6.4 TB NVMe SSD Devices

Oracle 6.4 TB NVMe SSD v2 Device with RL04 Stops when Deleting Namespace

Oracle 6.4 TB NVMe SSD v2 NVMe Configuration Menu Error

SPARC Servers Report NVMe Device Error When Using probe-nvme-all Command

Green OK/Activity LED Not Illuminated on New NVMe Storage Drives

Oracle ILOM Incorrectly Faults the Device with Message fault.io.scsi.cmd.disk.dev.rqs.baddrv

Oracle ILOM Reports a Fault for NVMe Devices When Performing a Reboot, Firmware Update, or Hot-Plug Operation

Oracle ILOM Reports Faults for Correctable Errors on Oracle 6.4 TB NVMe SSD

Secure Erase Drives Before Use

Diversity and Inclusion

Language:

Oracle Server X7-2 Configuration

Minimum required software for Oracle Server X7-2 is SW1.4.2.

For more information about server configuration, refer to the server documentation at https://www.oracle.com/goto/x7-2/docs.

Copyright © 2021, Oracle and/or its affiliates.