Supported Servers and Operating Systems

Language:

This section lists the servers that support Oracle 6.8 TB NVMe SSD v3s. For detailed information about using this storage drive with your server, see the product notes for your server, available at https://docs.oracle.com.

The following servers are supported for the Oracle 6.8 TB NVMe SSD v3.

SPARC Servers	Number of 6.4 TB NVMe SSDs	Slots Supported for Installing 6.4 TB NVMe SSDs	Minimum Supported Operating Systems
SPARC S7-2 Server	1 to 4	2, 3, 4, 5. Slots labeled NVMe0, NVMe1, NVMe2, NVMe3	Oracle Solaris 11.4
SPARC S7-2L Server	8 drive: 1 to 4 12 drive: 1 to 12 24 drive: 1 to 4	8 drive: 2, 3, 4, 5. Slots labeled NVMe0, NVMe1, NVMe2, NVMe3 12 drive: 1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23. Slots labeled NVMe0, NVMe1, NVMe2, NVMe3 NVMe4, NVMe5, NVMe6, NVMe7, NVMe8, NVMe9, NVMe10, NVMe11 24 drive: 3, 4, 19, 20. Slots labeled NVMe0, NVMe1, NVMe2, NVMe3	Oracle Solaris 11.4 Note - SPARC S7-2L with 3.5-inch 12 drive configuration does not support Oracle 6.8 TB NVMe SSD v3 operation.
SPARC T7-1 Server	1 to 4	2, 3, 4, 5. Slots labeled NVMe0, NVMe1, NVMe2, NVMe3	Oracle Solaris 11.4
SPARC T8-1 Server	1 to 4	2, 3, 4, 5. Slots labeled NVMe0, NVMe1, NVMe2, NVMe3	Oracle Solaris 11.4
SPARC T8-2 Server	1 to 4	2, 3, 4, 5. Slots labeled NVMe0, NVMe1, NVMe2, NVMe3	Oracle Solaris 11.4
SPARC T8-4 Server	1 to 8 2 Oracle PCIe Switch Cards	0, 1, 2, 3, 4, 5, 6, 7. Slots labeled NVMe0, NVMe1, NVMe2, NVMe3 NVMe4, NVMe5, NVMe6, NVMe7	Oracle Solaris 11.4

Other servers and processors might be added to this list in the future, if they qualify. Check your server product notes for confirmation that your server has subsequently been qualified for device support.

Caution - Any unsupported configuration causes the host to power off as soon as it is powered on. A fault is generated on the service processor when an unsupported configuration is detected. The fault clears after the unsupported configuration is fixed and the host is powered on.

Note - Slots that can contain either SAS HDD or NVMe storage drives have labels with both HDD and NVMe identification marks on the server panel.

Note - Refer to your server product notes for up-to date information on supported servers, operating systems, and required patchsets.