Go to main content

Oracle^® 6.8 TB (max 7.68 TB) NVMe SSD v3 Product Notes

Exit Print View

» ...Documentation Home » Oracle Flash Accelerator F640 PCIe Card and ... » Oracle^® 6.8 TB (max ... » Oracle 6.8 TB NVMe SSD v3 Product Notes » Supported Hardware and Software » Keep Drivers and Firmware Up to Date

Updated: September 2021

Oracle^® 6.8 TB (max 7.68 TB) NVMe SSD v3 Product Notes

Document Information

Using This Documentation

Oracle 6.8 TB NVMe SSD v3 Product Notes

Supported Hardware and Software

Supported Servers and Operating Systems

Minimum Supported Oracle 6.8 TB NVMe SSD v3 Firmware Version

Required Host Firmware

Keep Drivers and Firmware Up to Date

Server Management Tools

Implementation Considerations

SPARC S7-2 Server Configuration

SPARC S7-2L Server Configuration

SPARC T7-1 Server Configuration

SPARC T8-1 Server Configuration

SPARC T8-2 Server Configuration

SPARC T8-4 Server Configuration

SSD Volume Management

Accessing Software Updates and Firmware Downloads

SPARC Servers Report NVMe Device Error When Using probe-nvme-all Command

Oracle ILOM Incorrectly Faults the Device with Message fault.io.scsi.cmd.disk.dev.rqs.baddrv

Oracle ILOM Reports a Fault for NVMe Devices When Performing a Reboot, Firmware Update, or Hot-Plug Operation

Secure Erase Drives Before Use

Language:

Keep Drivers and Firmware Up to Date

Refer to the server documentation to check for updates to the device firmware. For information on updating drivers and firmware for Oracle 6.8 TB NVMe SSD v3s, see Accessing Software Updates and Firmware Downloads.

Copyright © 2021, Oracle and/or its affiliates.