Go to main content

Oracle^® 6.8 TB (max 7.68 TB) NVMe SSD v3 Product Notes

Exit Print View

» ...Documentation Home » Oracle Flash Accelerator F640 PCIe Card and ... » Oracle^® 6.8 TB (max ... » Oracle 6.8 TB NVMe SSD v3 Product Notes » Implementation Considerations » SPARC T8-1 Server Configuration

Updated: September 2021

Oracle^® 6.8 TB (max 7.68 TB) NVMe SSD v3 Product Notes

Document Information

Using This Documentation

Oracle 6.8 TB NVMe SSD v3 Product Notes

Supported Hardware and Software

Supported Servers and Operating Systems

Minimum Supported Oracle 6.8 TB NVMe SSD v3 Firmware Version

Required Host Firmware

Keep Drivers and Firmware Up to Date

Server Management Tools

Implementation Considerations

SPARC S7-2 Server Configuration

SPARC S7-2L Server Configuration

SPARC T7-1 Server Configuration

SPARC T8-1 Server Configuration

SPARC T8-2 Server Configuration

SPARC T8-4 Server Configuration

SSD Volume Management

Accessing Software Updates and Firmware Downloads

SPARC Servers Report NVMe Device Error When Using probe-nvme-all Command

Oracle ILOM Incorrectly Faults the Device with Message fault.io.scsi.cmd.disk.dev.rqs.baddrv

Oracle ILOM Reports a Fault for NVMe Devices When Performing a Reboot, Firmware Update, or Hot-Plug Operation

Secure Erase Drives Before Use

Language:

SPARC T8-1 Server Configuration

SPARC T8 series servers support Oracle 6.8 TB NVMe SSD v3 as a boot device. The SPARC T8-1 Server supports only one Oracle PCIe Switch Card in PCIe slot 3.

Refer to the server documentation at https://www.oracle.com/goto/t8-1/docs.

Copyright © 2021, Oracle and/or its affiliates.