Install the SFP28 Transceivers
When using the adapter in the 2x25 GbE mode, there are two cabling options. See
Cable and Transceiver Overview. The optical transceivers are available from Oracle. For the
latest information on available transceivers and cables, refer to Oracle's Product
Page.
Note -
There are two QSFP connector ports, port 1 (A) and port 1 (B).
-
Holding the optical transceiver by the edges, align the transceiver with the
slot in the adapter and slide the transceiver into the opening.
-
Applying even pressure at both corners of the transceiver, push the
transceiver until it is firmly seated in the slot.
-
Repeat Step 1 and Step 2 to install the second optical transceiver.
-
Power on the server.
-
Verify the adapter installation.
Follow the instructions in the appropriate section: