List of Tables

1-1 Admonishments
2-1 Point Code Format
2-2 14-Bit ITU National Point Code Values
2-3 Proxy Point Code Quantities and Part Numbers
2-4 Proxy Point Code Quantities and Part Numbers
2-5 Maximum Point Code Quantities
2-6 Maximum Alias Point Code Quantities
2-7 Example Cluster Routing Information
2-8 Home Cluster Routing Information
2-9 Routing Models
2-10 Routing Table for Nested Cluster 5-5-*
2-11 Routing Table for Full Point Code Member 5-5-1
2-12 Example of Nested Cluster Routing Failure and Recovery Actions
2-13 Reception of an RSx Message
2-14 Reception of an RCx Message
2-15 Destination Point Code Type and Alias Point Code Type Combinations
2-16 Maximum Alias Point Code Quantities
2-17 Destination Point Code Type and Alias Point Code Type Combinations
2-18 Maximum Alias Point Code Quantities
3-1 Linkset Parameters
3-2 Actions of the National Spare for Network Indicator Feature
3-3 Adding a Linkset Parameter Combinations
3-4 ITU SLS Bit Rotation
3-5 ANSI Linkset Incoming Bit Rotation Rules
3-6 ANSI SLS Bit Rotation
3-7 Route Management Messages Sent on Status Transition
3-8 MTP Restart Signaling Link Alignment Delay
3-9 Signaling Link Selector (SLS) Conversion (ANSI Linksets Only)
3-10 Linkset Parameters
3-11 Actions of the National Spare for Network Indicator Feature
3-12 Changing a Linkset Parameter Combinations
3-13 Secondary Adjacent Point Code Configuration Table
3-14 Signaling Link Parameters
3-15 SS7 Signaling Link Parameter Combinations
3-16 Level 2 Timer Sets
3-17 Level 2 Timer Values - Low-Speed ANSI Signaling Links
3-18 Level 2 Timer Values - Low-Speed ITU Signaling Links
3-19 Level 2 Timer Values - ITU-N High-Speed Signaling Links for China
3-20 Level 2 Timer Values - ITU-N High-Speed Signaling Links for Areas other than China
3-21 Level 2 Timer Values - Unchannelized T1 High-Speed Signaling Links
3-22 Loopback Point Configuration Table
3-23 ITU Random SLS Rules
3-24 ANSI Random SLS Rules
3-25 Failure Scenarios for a 32-Link Combined Linkset
3-26 High Capacity Thermal Limits
3-27 Add Exception Route Parameter Combinations
3-28 Remove Exception Route Parameter Combinations
3-29 Change Exception Route Parameter Combinations
3-30 Network Indicator Mapping Rules
4-1 PCT Quantities and Part Numbers
4-2 ENT-PCT Parameters
A-1 Functional Overview of the E1 and Channel Card
A-2 Channel Bridging E1 Port Pairing
A-3 E1 Signaling Link Configuration Form
A-4 E1 Card Part Numbers
A-5 HC-MIM Card Locations
A-6 Card Removal Procedures
A-7 Maximum Number of E1 Ports
A-8 E1 Interface Parameter Combinations
A-9 Channel Bridging Ports
A-10 Channel Bridged E1 Port Combinations
A-11 SE-HSL SLK QuantityPart Numbers
A-12 Unchannelized E1 Port Parameter Combinations
A-13 E1 Interface Parameter Combinations
A-14 Unchannelized E1 Port Parameter Combinations
A-15 Channel Bridging Ports
A-16 Channel Bridged E1 Port Parameter Combinations
A-17 Non-Channel Bridged E1 Port Parameter Combinations
A-18 E1 Signaling Link Configuration Table
A-19 E1 Signaling Link Parameter Combinations
B-1 Functional Overview of the T1 and Channel Card
B-2 Channel Bridging T1 Port Pairing
B-3 T1 Signaling Link Configuration Form
B-4 T1 Card Part Numbers
B-5 HC-MIM Card Locations
B-6 Card Removal Procedures
B-7 Maximum Number of T1 Ports
B-8 T1 Interface Parameter Combinations
B-9 Channel Bridging Ports
B-10 Channel Bridged T1 Port Combinations
B-11 ST-HSL-A SLK Quantity Part Numbers
B-12 Unchannelized T1 Port Parameter Combinations
B-13 T1 Interface Parameter Combinations
B-14 Unchannelized T1 Port Parameter Combinations
B-15 Channel Bridging Ports
B-16 Channel Bridged T1 Port Parameter Combinations
B-17 Non-Channel Bridged T1 Port Parameter Combinations
B-18 T1 Signaling Link Parameter Combinations
C-1 Link Proving Differences Between ITU and ANSI
C-2 ATM High-Speed Signaling Link Loopback Support
C-3 High-Speed Signaling Link vs. Low-Speed Signaling Link Unavailability Reasons by Priority
C-4 High-Speed Signaling Link State Transition Alignment Events
C-5 High-Speed Signaling Link Transmitted/Received Alignment PDUs
C-6 High-Speed Signaling Link Special Level 1 Alignment Events
C-7 Signaling Link Unsolicited Alarm Messages
C-8 Loopback Test UIMs
C-9 ATM High-Speed LIM Card Type and Card Application Combinations
C-10 Example Card Configuration
C-11 3 Links per E5-ATM-B Card Quantities and Part Numbers
C-12 ATM Signaling Link Cable Lengths
C-13 ATM High-Speed Signaling Link Parameter Combinations