4.267 dlt-t1
Use this command to delete an interface for E5-E1T1-B cards used as T1 or ST-HSL-A cards.
Parameters
- loc (mandatory)
- The card location as stenciled on the shelf of the system.
- Range:
- 1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
Example
dlt-t1:loc=1205:t1port=2
Dependencies
The specified card location (loc parameter) must be equipped.
The card in the specified card location (loc parameter) must be a LIMT1 card type.
The port specified by the t1port parameter must be already equipped with a T1 interface.
The E1/T1 table must be accessible.
The Card (IMT) table must be accessible.
All signaling links providing timeslots serviced by the specified T1 interface must be deleted before the T1 interface can be deleted. Use the dlt-slk
command to delete the signaling links providing the timeslots.
Card locations 1113 - 1118 (E5-MASP and E5-MDAL cards) cannot be specified as values for the loc parameter.
Notes
None.
Output
dlt-t1:loc=1205:t1port=1
rlghncxa03w 04-02-20 09:07:58 EST EAGLE 31.3.0
DLT-T1: MASP A - COMPLTD
;