4.358 ent-t1
Use this command to enter an interface for an E5-E1T1-B card used as a T1 or ST-HSL-A card.
Parameters
- loc (mandatory)
- The card location as stenciled on the shelf of the system.
- Range:
- 1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
- t1port (mandatory)
- T1 card port number. The value must be a T1 port for which an interface has not been configured on the specified T1 card.
- framing (optional)
- Indicator for framing format. esfperf is the framing format with performance monitoring.
- linkclass (optional)
- Link class for links assigned to T1 cards (channelized links) or ST-HSL-A cards (unchannelized links).
Example
ent-t1:loc=1205:t1port=1:encode=ami:framing=sf:ll=100
ent-t1:loc=1203:t1port=1
ent-t1:loc=1203:t1port=2:linkclass=unchan:minsurate=1200
ent-t1:loc=1205:t1port=1:encode=ami:t1tsel=external:framing=sf:ll=100
ent-t1:loc=1205:t1port=2:encode=b8zs:t1tsel=line:framing=sf
Dependencies
The specified card location (loc parameter) must be equipped.
The card specified by the loc parameter must be a LIMT1 card type.
The E1/T1 table must be accessible.
The Card (IMT) table must be accessible.
The port specified by the t1port parameter must not be already equipped with a T1 interface.
HIPR2 cards must be equipped in card locations xy09 and xy10 (x is the frame, y is the shelf) on each EAGLE shelf that contains one or more /E5-E1T1-B cards that are used as T1 cards or ST-HSL-A cards.
Card locations 1113 - 1118 (E5-MASP and E5-MDAL cards) cannot be specified as values for the loc parameter.
The linkclass=unchan parameter must be specified before the minsurate parameter can be specified.
An ST-HSL-A feature quantity must be enabled before the linkclass=unchan parameter can be specified for an ST-HSL-A card.
Channelized and unchannelized T1 ports (mixed mode) cannot be specified on a single card (the card cannot be used as a T1 card and an ST-HSL-A card at the same time).
Only 2 of the 8 ports can be used for T1 interfaces on an E5-E1T1-B card that is used as an ST-HSL-A card.
The ST-HSL-A feature must be turned on before the framing=esfperf parameter can be specified.
Notes
One or two T1 interfaces must be defined on a T1 card after the T1 card type (LIMT1) is defined in the database, and before the signaling links and associated timeslots are defined for the T1 card.
External timing is derived from the EAGLE High-Speed Master Clock (1.544 MHz for T1 or 2.048 MHz for E1); therefore, the Master Timing feature is required. Line timing is derived from its received data stream, if present.
Up to 8 T1 interfaces can be defined on an /E5-E1T1-B card used as a T1 card after the T1 card type (LIMT1) is defined in the database, and before the signaling links and associated timeslots are defined for the T1 card.
For an ST-HSL-A card, the minsurate parameter indicates the least number of SUs present on a link uniformly distributed. The number of SUs present is the minsurate parameter value (without link traffic) and the minsurate parameter value minus the number of MSUs (with link traffic).
Output
ent-t1:loc=1205:t1port=1:encode=ami:framing=sf:ll=100
rlghncxa03w 04-02-20 09:07:58 EST EAGLE 31.3.0
ENT-T1: MASP A - COMPLTD
;