4.591 rtrv-t1

Use this command to retrieve information for a specified T1 interface or for all T1 interfaces that have been defined by the ent-t1 command for an E5-E1T1-B card that is used as a T1 or ST-HSL-A card.

Parameters

loc (optional)
The card location as stenciled on the shelf of the system.
Range:
1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
Default:
all T1 card locations are listed
t1port (optional)
T1 port number. The value must be a T1 port that has already been configured with a T1 interface on the specified T1 card (loc parameter).
Range:
1 - 8
Default:
If not specified, all T1 ports are listed.

Example

rtrv-t1

rtrv-t1:loc=1307:t1port=2

rtrv-t1:loc=1311:t1port=1

Dependencies

The loc and t1port parameters must be specified together, if any parameters are specified for the command.

The T1 interface of the T1 card specified by the loc parameter must already be defined before this command can be entered.

The card specified by the loc parameter must be a LIMT1 card type.

The Card (IMT) table must be accessible.

The E1/T1 table must be accessible.

The port specified by the t1port parameter on the card specified by the loc parameter must be already equipped with a T1 interface.

The following card locations (loc parameter) are not valid for this command: 1113 - 1118 and all xy09 and xy10 locations (where x is the frame and y is the shelf).

Notes

None.

Output

Legend

  • LOC—T1card location in the shelf
  • T1PORT—T1 port number on a T1 card
  • ENCODE—Indicator for use of B8ZS or AMI encoding/decoding
  • FRAMING—Framing format (SF or ESF)
  • LL—Line length; T1 cable length in feet between the EAGLE and the connecting node
  • MINSURATE—Minimum number of signaling units present on a link uniformly distributed. A value appears in this field only when the LINKCLASS field value is UNCHAN.
  • TSx—Timeslot

Related Topics