4.397 rept-stat-cdl

Use this command to generate a report of the signaling links currently in Command Driven Loopback (CDL) testing, including the amount of time the link has been in CDL testing.

Command Driven Loopback is the ability to locally drive a signaling link into a manual line loopback. The data received on the signaling link is echoed (transmitted) back. This is effectively the reverse of the tst-slk:loopback=lxvr command, which loops the transmitted data back to the receive.

Parameters

link (optional)
SS7 signaling links. The signaling links that is being tested.
Synonym:
port
Range:
a, b, a1 - a31, b1 - b31

Not all card types support all link parameter values.

See Table A-1  for valid link parameter range values for each type of card that can have assigned signaling link ports.

Default:
All signaling links that are in CDL testing are displayed.
loc (optional)
The card location as stenciled on the shelf of the system.
Range:
1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
Default:
All cards containing signaling links that are in CDL testing are displayed.
loopback (optional)
Loopback test type.
Range:
line
payload

Note:

The payload value is valid only on LIM-ATM and E1-ATM cards.
Default:
All loopback tests are displayed.

Example

rept-stat-cdl

rept-stat-cdl:loc=1201

rept-stat-cdl:loc=1203:link=a

rept-stat-cdl:loopback=payload

Dependencies

If the link parameter is specified, the loc parameter must be specified.

The card location specified in the loc parameter must be equipped.

The signaling link specified in the link parameter must be equipped.

This command is not available during upgrade.

The card location specified in the loc parameter cannot be reserved by the system.

Notes

This command can be canceled using the F9 function key or the canc-cmd command. See canc-cmd for more information

Output

rept-stat-cdl 

    tekelecstp 03-11-27 01:29:06 EST  EAGLE 31.3.0
    SLK        CDL      CDL-TIME  
    1102,A1    LINE     00:04:01   
    1201,A     PAYLOAD  01:04:11   
    1203,A     LINE     00:22:21   
    1203,B     LINE     20:04:01   
    1208,A     LINE     01:05:22   
    1211,A     PAYLOAD  00:14:01   
;

Legend

  • SLK—The card and assigned signaling link that is in CDL testing
  • CDL—Command Driven Loopback test type (LINE or PAYLOAD)
  • CDL-TIME—Time that the signaling link has been in CDL testing. This value can be up to 99:59:59. The test can run longer than 100 hours, but this field will not record times longer than 100 hours.

Related Topics