Update a Wi-Fi Network Interface

You can review and update settings for a Wi-Fi interface on a Cloud Connector's Network tab. Some common values for the interface are editable.

Tab Overview

When you choose a Wi-Fi interface on the network tab, Oracle ECP shows the following graph below the interface chooser.

• Wi-Fi interface bandwidth rate - This graph displays transmitted and received bandwidth over time, in both bits per second and packets per second.

Context

From the Network tab you can choose an option that lets you check or update Wi-Fi network interface.

Procedure

1. Log on to Oracle ECP and go to the Inventory page.
2. Click the first drop-down at the top of the page and click Edge Nodes.
3. Choose the row of the Cloud Connector that requires network interface setting updates and click the link in the Name column.
   The Edge Node Details page opens.
4. Click the drop-down at the top of the Network tab to choose the Wi-Fi network interface. Valid options are WiFi-2.4GHz and WiFi-5GHz.
   The WiFi-2.4GHz Network Settings or WiFi-5GHz Network Settings drawer opens depending on the selected interface.
5. Review IP settings of this Wi-Fi as required:
   Wi-Fi interface network IP information:

   Enable	Toggle this Wi-Fi interface from Enabled to Disabled.
   Make	The manufacturer name of this Wi-Fi hardware.
   Firmware Version	The firmware version of this Wi-Fi hardware.
   IP Address	The IP address of this Wi-Fi interface.
   Subnet Mask	The DNS address devices connecting to this Wi-Fi interface will use.
   Static IP	The IP address, used in conjunction with the Static Subnet Mask that defines the network that locally connected devices should be configured on to connect to this Cloud Connector. For instance, a Static IP might be 192.168.1.100 , which, when combined with a Static Subnet Mask, directs devices to the correct network segment.
   Static Subnet Mask	The subnet mask portion of the network identifier used with the Static IP that defines the network that locally connected devices should be configured on to connect to this Cloud Connector. Typically, this would be a value like 255.255.255.0 , which determines the scope of the local network.

   Wi-Fi interface wireless network information:

   Band	Reports the operational frequency band for this Wi-Fi interface as 2.4 GHz or 5 GHz.
   Operation Mode	Reports the 802.11 wireless standard for this Wi-Fi network interface.
   SSID	The unique Service Set Identifier (SSID) assigned to the Wi-Fi network during Cloud Connector onboarding. You can change this value.
   Password	The password for this SSID assigned during Cloud Connector onboarding used to connect to this Wi-Fi interface. You can change this value.
   Key Management	Reports key management protocol used with the Wi-Fi interface.
   Security Protocol	Reports the security protocol used for encrypting data with this Wi-Fi interface.
   Country Code	The country code where this Wi-Fi interface operates and determines broadcast details and compliance. This field defaults to Auto, but may be changed as necessary.
   Channel	The Wi-Fi channel which this Wi-Fi interface is using.

6. If you have changed any values, click Save to update the settings, otherwise click cancel to return to the Network tab.

Other options for a Wi-Fi network interface:

• Review Proxy Settings
• Edit LAN DHCP or Static IP Values
• Manage Devices on a Wireless Network
• Update Firewall Settings