Go to main content

Oracle® Servers X7-2 and X7-2L Operating Systems Installation Guide

Exit Print View

Updated: September 2017

Resetting or Powering on the Server

  1. Reset or power on the server.
    • From the local server:

      Press the On/Standby button on the front panel of the server (for approximately 1 second) to turn the server off, then press the On/Standby button again to power on the server.

    • From the Oracle ILOM CLI: To gracefully shut down the server, type stop /System. To power on the server, type start /System.

    • From the Oracle ILOM web interface: Click Host Management → Power Control, select Reset from the Select Action list box, then click Save.

    • From the Oracle ILOM CLI: To reset the server, type reset /System.

    The server begins the boot process and the BIOS screen appears.

    image:Graphic showing the BIOS Screen.

    Tip  -  For server power control procedures, refer to Controlling System Power in Oracle Servers X7-2 and X7-2L Installation Guide.
  2. When the server is reset, return to the OS installation task.