Table of Contents
- List of Figures
- List of Tables
- Title and Copyright Information
- Preface
- 1 SCSI Operation and Configuration
-
2
SCSI Commands
- Command Descriptor Block (CDB) Structure
- Supported SCSI Command Status Byte Codes
- Initialize Element Status (07h)
- Initialize Element Status with Range (37h)
- Inquiry (12h)
- Log Sense (4Dh)
-
Mode Select 6-byte (15h) and Mode Select 10-byte (55h)
- Mode Select Parameter Header
- FC Disconnect/Reconnect Page
- SAS Disconnect/Reconnect Page
- Fibre Channel Logical Unit Page
- SAS Logical Unit Page
- Fibre Channel Port Control Page
- SAS Port Control Page
- SAS Phy Control and Discover Mode Subpage
- Information Exceptions TapeAlert Page
- Element Address Assignment Mode Page
-
Mode Sense 6-byte (1Ah) and Mode Sense 10-byte (5Ah)
- Mode Sense Parameter Header
- FC Disconnect/Reconnect Page
- SAS Disconnect/Reconnect Page
- FC Logical Unit Control Page
- SAS Logical Unit Page
- FC Port Control Page
- SAS Port Control Page
- SAS Phy Control and Discover Mode Subpage
- SAS Shared Control Mode Subpage
- SAS Enhanced Phy Control Subpage
- Informational Exceptions Tape Alert Control Page
- Element Address Assignment Page
- Transport Geometry Mode Page
- Device Capabilities Page
- Move Medium (A5h)
- Persistent Reserve In (5Eh)
- Persistent Reserve Out (5Fh)
- Position to Element (2Bh)
- Prevent/Allow Medium Removal (1Eh)
- Read Element Status (B8h)
- Release 6-byte (17h) and Release 10-byte (57h)
- Report LUNs (A0h)
- Report Target Port Groups (A3h)
- Request Sense (03h)
- Request Volume Element Address (B5h)
- Reserve 6-byte (16h) and Reserve 10-byte (56h)
- Send Diagnostic (1Dh)
- Send Volume Tag (B6h)
- Test Unit Ready (00h)