51.3 Container-Managed Transactions
In an enterprise bean with container-managed transaction demarcation, the EJB container sets the boundaries of the transactions. You can use container-managed transactions with any type of enterprise bean: session or message-driven. Container-managed transactions simplify development because the enterprise bean code does not explicitly mark the transaction's boundaries. The code does not include statements that begin and end the transaction. By default, if no transaction demarcation is specified, enterprise beans use container-managed transaction demarcation.
Typically, the container begins a transaction immediately before an enterprise bean method starts and commits the transaction just before the method exits. Each method can be associated with a single transaction. Nested or multiple transactions are not allowed within a method.
Container-managed transactions do not require all methods to be associated with transactions. When developing a bean, you can set the transaction attributes to specify which of the bean's methods are associated with transactions.
Enterprise beans that use container-managed transaction demarcation must not use any transaction-management methods that interfere with the container's transaction demarcation boundaries. Examples of such methods are the commit
, setAutoCommit
, and rollback
methods of java.sql.Connection
or the commit
and rollback
methods of javax.jms.Session
. If you require control over the transaction demarcation, you must use application-managed transaction demarcation.
Enterprise beans that use container-managed transaction demarcation also must not use the javax.transaction.UserTransaction
interface.
51.3.1 Transaction Attributes
A transaction attribute controls the scope of a transaction. Figure 51-1 illustrates why controlling the scope is important. In the diagram, method-A
begins a transaction and then invokes method-B
of Bean-2
. When method-B
executes, does it run within the scope of the transaction started by method-A
, or does it execute with a new transaction? The answer depends on the transaction attribute of method-B
.
A transaction attribute can have one of the following values:
-
Required
-
RequiresNew
-
Mandatory
-
NotSupported
-
Supports
-
Never
51.3.1.1 Required Attribute
If the client is running within a transaction and invokes the enterprise bean's method, the method executes within the client's transaction. If the client is not associated with a transaction, the container starts a new transaction before running the method.
The Required
attribute is the implicit transaction attribute for all enterprise bean methods running with container-managed transaction demarcation. You typically do not set the Required
attribute unless you need to override another transaction attribute. Because transaction attributes are declarative, you can easily change them later.
51.3.1.2 RequiresNew Attribute
If the client is running within a transaction and invokes the enterprise bean's method, the container takes the following steps:
-
Suspends the client's transaction
-
Starts a new transaction
-
Delegates the call to the method
-
Resumes the client's transaction after the method completes
If the client is not associated with a transaction, the container starts a new transaction before running the method.
You should use the RequiresNew
attribute when you want to ensure that the method always runs within a new transaction.
51.3.1.3 Mandatory Attribute
If the client is running within a transaction and invokes the enterprise bean's method, the method executes within the client's transaction. If the client is not associated with a transaction, the container throws a TransactionRequiredException
.
Use the Mandatory
attribute if the enterprise bean's method must use the transaction of the client.
51.3.1.4 NotSupported Attribute
If the client is running within a transaction and invokes the enterprise bean's method, the container suspends the client's transaction before invoking the method. After the method has completed, the container resumes the client's transaction.
If the client is not associated with a transaction, the container does not start a new transaction before running the method.
Use the NotSupported
attribute for methods that don't need transactions. Because transactions involve overhead, this attribute may improve performance.
51.3.1.5 Supports Attribute
If the client is running within a transaction and invokes the enterprise bean's method, the method executes within the client's transaction. If the client is not associated with a transaction, the container does not start a new transaction before running the method.
Because the transactional behavior of the method may vary, you should use the Supports
attribute with caution.
51.3.1.6 Never Attribute
If the client is running within a transaction and invokes the enterprise bean's method, the container throws a RemoteException
. If the client is not associated with a transaction, the container does not start a new transaction before running the method.
51.3.1.7 Summary of Transaction Attributes
Table 51-1 summarizes the effects of the transaction attributes. Both the T1
and the T2
transactions are controlled by the container. A T1
transaction is associated with the client that calls a method in the enterprise bean. In most cases, the client is another enterprise bean. A T2
transaction is started by the container just before the method executes.
In the last column of Table 51-1, the word "None" means that the business method does not execute within a transaction controlled by the container. However, the database calls in such a business method might be controlled by the transaction manager of the database management system.
Table 51-1 Transaction Attributes and Scope
Transaction Attribute | Client's Transaction | Business Method's Transaction |
---|---|---|
|
None |
T2 |
|
T1 |
T1 |
|
None |
T2 |
|
T1 |
T2 |
|
None |
Error |
|
T1 |
T1 |
|
None |
None |
|
T1 |
None |
|
None |
None |
|
T1 |
T1 |
|
None |
None |
|
T1 |
Error |
51.3.1.8 Setting Transaction Attributes
Transaction attributes are specified by decorating the enterprise bean class or method with a javax.ejb.TransactionAttribute
annotation and setting it to one of the javax.ejb.TransactionAttributeType
constants.
If you decorate the enterprise bean class with @TransactionAttribute
, the specified TransactionAttributeType
is applied to all the business methods in the class. Decorating a business method with @TransactionAttribute
applies the TransactionAttributeType
only to that method. If a @TransactionAttribute
annotation decorates both the class and the method, the method TransactionAttributeType
overrides the class TransactionAttributeType
.
The TransactionAttributeType
constants shown in Table 51-2 encapsulate the transaction attributes described earlier in this section.
Table 51-2 TransactionAttributeType Constants
Transaction Attribute | TransactionAttributeType Constant |
---|---|
|
|
|
|
|
|
|
|
|
|
|
|
The following code snippet demonstrates how to use the @TransactionAttribute
annotation:
@TransactionAttribute(NOT_SUPPORTED) @Stateful public class TransactionBean implements Transaction { ... @TransactionAttribute(REQUIRES_NEW) public void firstMethod() {...} @TransactionAttribute(REQUIRED) public void secondMethod() {...} public void thirdMethod() {...} public void fourthMethod() {...} }
In this example, the TransactionBean
class's transaction attribute has been set to NotSupported
, firstMethod
has been set to RequiresNew
, and secondMethod
has been set to Required
. Because a @TransactionAttribute
set on a method overrides the class @TransactionAttribute
, calls to firstMethod
will create a new transaction, and calls to secondMethod
will either run in the current transaction or start a new transaction. Calls to thirdMethod
or fourthMethod
do not take place within a transaction.
51.3.2 Rolling Back a Container-Managed Transaction
There are two ways to roll back a container-managed transaction. First, if a system exception is thrown, the container will automatically roll back the transaction. Second, by invoking the setRollbackOnly
method of the EJBContext
interface, the bean method instructs the container to roll back the transaction. If the bean throws an application exception, the rollback is not automatic but can be initiated by a call to setRollbackOnly
.
51.3.3 Synchronizing a Session Bean's Instance Variables
The SessionSynchronization
interface, which is optional, allows stateful session bean instances to receive transaction synchronization notifications. For example, you could synchronize the instance variables of an enterprise bean with their corresponding values in the database. The container invokes the SessionSynchronization
methods (afterBegin
, beforeCompletion
, and afterCompletion
) at each of the main stages of a transaction.
The afterBegin
method informs the instance that a new transaction has begun. The container invokes afterBegin
immediately before it invokes the business method.
The container invokes the beforeCompletion
method after the business method has finished but just before the transaction commits. The beforeCompletion
method is the last opportunity for the session bean to roll back the transaction (by calling setRollbackOnly
).
The afterCompletion
method indicates that the transaction has completed. This method has a single boolean
parameter whose value is true
if the transaction was committed and false
if it was rolled back.
51.3.4 Methods Not Allowed in Container-Managed Transactions
You should not invoke any method that might interfere with the transaction boundaries set by the container. The following methods are prohibited:
You can, however, use these methods to set boundaries in application-managed transactions.