Installing the Mounting Brackets Onto the Server
You must install the mounting brackets onto the server before you can rackmount
Install Mounting Brackets
To install the mounting brackets onto the sides of the server:
- Position a mounting bracket against the chassis so that the slide-rail lock is at
the server front, and the four keyed openings on the mounting bracket are
aligned with the four locating pins on the side of the chassis (Aligning the Mounting Bracket With the Server Chassis).
Figure 2-2 Aligning the Mounting Bracket With the Server Chassis
1 Chassis front
2 Slide-rail lock
3 Mounting bracket
4 Mounting bracket clip
- With the heads of the four chassis locating pins protruding though the four
keyed openings in the mounting bracket, pull the mounting bracket toward the front
of the chassis until the mounting bracket clip locks into place with an
audible click (Aligning the Mounting Bracket With the Server Chassis).
- Verify that the rear locating pin has engaged the mounting bracket clip (Aligning the Mounting Bracket With the Server Chassis).
- Repeat to install the remaining mounting bracket on the other side of the