When a PSH fault is detected, a Oracle Solaris console message is displayed, similar to the following example.
Example 8 Console Message Showing Fault Detected by PSH
SUNW-MSG-ID: SUN4V-8000-DX, TYPE: Fault, VER: 1, SEVERITY: Minor EVENT-TIME: Wed Sep 14 10:09:46 EDT 2005 PLATFORM: SUNW,system_name, CSN: -, HOSTNAME: wgs48-37 SOURCE: cpumem-diagnosis, REV: 1.5 EVENT-ID: f92e9fbe-735e-c218-cf87-9e1720a28004 DESC: The number of errors associated with this memory module has exceeded acceptable levels. Refer to http://sun.com/msg/SUN4V-8000-DX for more information. AUTO-RESPONSE: Pages of memory associated with this memory module are being removed from service as errors are reported. IMPACT: Total system memory capacity will be reduced as pages are retired. REC-ACTION: Schedule a repair procedure to replace the affected memory module. Use fmdump -v -u <EVENT_ID> to identify the module.
Faults detected by the Oracle Solaris PSH facility are also reported through service processor alerts.
Note - You can configure Oracle ILOM to generate SNMP traps or e-mail alerts when a fault is detected by Oracle Solaris PSH. You can also configure the ALOM CMT compatibility shell to display Oracle Solaris PSH alerts. See the Oracle Integrated Lights Out Manager 3.0 Concepts Guide.
The following example depicts an ALOM CMT alert of the same fault reported by Oracle Solaris PSH in Console Message Showing Fault Detected by PSH.
Example 9 ALOM CMT Alert of PSH Diagnosed Fault
SC Alert: Host detected fault, MSGID: SUN4V-8000-DX
The Oracle ILOM show faulty command provides summary information about the fault. See Detect Faults (Oracle ILOM show faulty Command) for more information about the show faulty command.
Note - The Service Required LED is also turned on for PSH diagnosed faults.