Sun Blade X6450 Embedded Lights Out Manager Administration Guide
820-3541-10
Contents |
1. Sun Blade X6450 Server Module Embedded Lights Out Manager Overview
Embedded Lights Out Manager Common Tasks
Sun Blade X6450 Server Module Default Settings
About the Preconfigured Administrator Account
About the System Indicator LED
About the Service Action Required LED
Responding to the Front Panel Service Action Required LED
To Respond to a Solidly Lit Service Action Required LED
To Respond to a Blinking Service Action Required LED
Connecting to the Server Module’s SP ELOM Using Ethernet
To Connect to the Server Module’s SP CLI ELOM Using Ethernet and SSH
To Connect to the Server Module’s SP Web GUI ELOM Using Ethernet and a Browser
Connecting to Server Module’s SP CLI ELOM Using the Serial Port
To Connect to the Server Module’s SP CLI ELOM Using the Serial Port
Connecting to the Server Module’s SP ELOM Through the CMM
To Connect to the Server Module’s SP CLI ELOM Through the CMM Using Ethernet and SSH
To Connect to the Server Module’s SP Web GUI ELOM Through the CMM Using Ethernet and a Browser
To Connect to the Server Module’s SP CLI ELOM Through the CMM Using the Chassis Serial Connector
3. Monitoring the Server Module Using the ELOM Web GUI
Browser and Software Requirements
Accessing the System Using a Browser
To Access the System Using a Browser
Viewing the System From the Web GUI
To View Server and Chassis Board Information
To View BMC Version Information
Viewing and Managing the Event Log
To View and Manage the Event Log
4. Configuring, Managing, and Maintaining the Server Using the Web GUI
Configuring Email Notification
To Configure Email Notification
Configuring Traps with the Platform Event Filter
To Configure Traps with the Platform Event Filter Screen
Configuring the SSL Certificate
To Upload an Existing Certificate
To Change a User Account Password or Privilege
To Enable or Disable a User Account
Managing and Maintaining the Server
Managing the Locator Indicator and Fault LED
To Control the State of the System Indicator LED
To View the State of the Fault LED
Resetting the Baseboard Management Controller
To Update the Firmware Using the Web GUI
Updating the CPLD Using the Web GUI
To Update CPLD Using the Web GUI
Recovering from a Corrupt Service Processor
To Recover from a Corrupt Service Processor
5. Using the Remote Console Application
Accessing the Remote Console From the Web GUI
Starting the Remote Console Application
To Start the Remote Console Application
Installing an OS on a Remote Server
To Install an OS on a Remote Server Using a Virtual CD/DVD
6. Accessing and Monitoring the Server Using the ELOM CLI
CLI Structure and Command Syntax
User Accounts and Permissions Levels
Monitoring Server System Information
Viewing Server Module-Specific Information
To View Server Module-Specific Information
Viewing Server Module Sensor Information
To View Server Module Sensor Information
Viewing Chassis and Midplane Information
To View Chassis and Midplane Information
7. Configuring and Managing the Server Using the CLI
Configuration and Management Tasks
Managing ELOM Network Settings
Displaying PET Target Properties
To Display PET Target Properties
Configuring the PET IP Address
To Configure the PET IP Address
Configuring the PEF Global Controls
To Configure the PEF Global Controls
Configuring the Event Filter Tables
To Configure the Event Filter Tables
To Manage the System Event Log
Managing the Power State of the Server
To Manage the Power State of the Server
9. Using Simple Network Management Protocol
Adding Your Server to Your SNMP Environment
Configuring Receipt of SNMP Traps
To Create an SNMP User Account
To Set Permission for a User Account
A. Command-Line Interface Reference
CLI Commands and Syntax Reference
Properites and Values for Targets
/SP/AgentInfo/PEF/EventFilterTbl[1:6]
/SP/AgentInfo/Mail/receiver[1:10]
/SP/AgentInfo/SNMP/communities/public
/SP/AgentInfo/SNMP/communities/private
/SYS/MemModule/Memory/DIMM[A0:D5]
/SYS/Temperature/Temperature[1:N]
Copyright © 2008, Sun Microsystems, Inc. All Rights Reserved.