Sun Blade T6300 Server Module Service Manual
820-0276-10
Contents |
1. Sun Blade T6300 Server Module Product Description
1.1.1 Chip-Multithreaded (CMT) Multicore Processor and Memory Technology
1.1.2 Support for RAID Storage Configurations
1.3 Additional Service Related Information
2. Sun Blade T6300 Server Module Diagnostics
2.1 Sun Blade T6300 Server Module Diagnostics Overview
2.1.1 Memory Configuration and Fault Handling
2.1.1.3 DIMM Installation Rules
2.1.1.5 Troubleshooting Memory Faults
2.2.1 Front Panel LEDs and Buttons
2.3 Using ALOM CMT for Diagnosis and Repair Verification
2.3.1 Running ALOM CMT Service-Related Commands
2.3.1.2 Switching Between the System Console and ALOM
2.3.1.3 Service-Related ALOM CMT Commands
2.3.2 Displaying System Faults
2.3.3 Displaying the Environmental Status
2.3.4 Displaying FRU Information
2.4.1 Controlling How POST Runs
2.4.2 Changing POST Parameters
2.4.3.1 Verifying Hardware Functionality
2.4.3.2 Diagnosing the System Hardware
2.4.5 Clearing POST Detected Faults
2.5 Using the Solaris Predictive Self-Healing Feature
2.5.1 Identifying Faults With the fmdump Command
2.5.2 Clearing PSH Detected Faults
2.5.3 Clearing the PSH Fault From the ALOM CMT Logs
2.6 Collecting Information From Solaris OS Files and Commands
2.6.1 Checking the Message Buffer
2.6.2 Viewing the System Message Log Files
2.7 Managing Components With Automatic System Recovery Commands
2.7.1 Displaying System Components With the showcomponent Command
2.7.2 Disabling Components With the disablecomponent Command
2.7.3 Enabling a Disabled Component With the enablecomponent Command
2.8 Exercising the System With SunVTS
2.8.1 Checking SunVTS Software Installation
2.8.2 Exercising the System Using SunVTS Software
3. Replacing Hot-Swappable and Hot-Pluggable Components
3.2.3 Replacing a Hard Drive or Installing a New Hard Drive
4. Replacing Cold-Swappable Components
4.1.2 Electrostatic Discharge Safety
4.1.2.1 Using an Antistatic Wrist Strap
4.1.2.2 Using an Antistatic Mat
4.2 Common Procedures for Parts Replacement
4.2.2 Shutting Down the System
4.2.3 Removing the Sun Blade T6300 Server Module From the Sun Blade 6000 Chassis
4.3 Removing and Replacing DIMMS
4.3.1.2 DIMM Installation Rules
4.3.4 Removing the Service Processor
4.3.5 Replacing the Service Processor
4.4 Removing the Disk Backplane Cables
4.4.1 Replacing the Disk Backplane Cables
4.5 Removing the Battery on the Service Processor
4.5.1 Replacing the Battery on the Service Processor
4.6 Finishing Component Replacement
4.6.2 Reinstalling the Server Module in the Chassis
Copyright © 2007, Sun Microsystems, Inc. All Rights Reserved.