Figures

FIGURE 1-1 Attaching the Antistatic Wrist Strap

FIGURE 2-1 Locating the Power Supply Locking Mechanism on the Netra CT 810 Server

FIGURE 2-2 System Status Panel Locations

FIGURE 2-3 System Power Button and System Power LED Locations (Netra CT 810 Server)

FIGURE 2-4 System Power Button and System Power LED Locations (Netra CT 410 Server)

FIGURE 4-1 System Status Panel Locations

FIGURE 4-2 System Status Panel (Netra CT 810 Server)

FIGURE 4-3 System Status Panel (Netra CT 410 Server)

FIGURE 4-4 Power and Okay to Remove LEDs

FIGURE 4-5 Power and Fault LEDs

FIGURE 4-6 Connectors on the Netra CP2140 Host Rear Transition Module

FIGURE 4-7 Connectors on the Netra CP2500 Rear Transition Module Host (RTM-H) Board

FIGURE 6-1 Boards Within a Netra CT 810 Server

FIGURE 6-2 Boards Within a Netra CT 410 Server

FIGURE 6-3 Location of SW0501 on SMC Module

FIGURE 6-4 Switch SW0501 in Closed Position (Default) for the Netra CT Server

FIGURE 6-5 Reconfiguring a Netra CP2500 cPSB Board for Use as a cPCI Board

FIGURE 6-6 Loosening the Ejection Lever Captive Screws

FIGURE 6-7 Unlocking the Ejection Levers

FIGURE 6-8 LEDs on the System Status Panel (Netra CT 810 Server)

FIGURE 6-9 LEDs on the System Status Panel (Netra CT 410 Server)

FIGURE 6-10 Aligning the Board with the Board Cage Cutouts

FIGURE 6-11 Tightening the Ejection Lever Captive Screws

FIGURE 6-12 Connectors for the Single-Wide 6U Alarm Card

FIGURE 6-13 Connectors for the Double-Wide 3U Alarm Card

FIGURE 6-14 Connectors on the Netra CP2140 Host CPU Board

FIGURE 6-15 Connectors on the Netra CP2500 Host CPU Board

FIGURE 6-16 Supported and Unsupported Netra CP2140 Host Rear Transition Module for a Netra CT Server

FIGURE 6-17 Netra CP2500 Rear Transition Module-Host (RTM-H)

FIGURE 6-18 Locating the Host Rear Transition Module in a Netra CT (Top View)

FIGURE 6-19 Locating the Host Rear Transition Module in a Netra CT (Top View)

FIGURE 6-20 Aligning the Module with the Rear Cage Cutouts

FIGURE 6-21 Supported Locations for Satellite CPU or I/O Rear Transition Module Sets in a Netra CT 810 Server (Top View)

FIGURE 6-22 Supported Locations for Satellite CPU or I/O Rear Transition Module Sets in a Netra CT 410 Server (Top View)

FIGURE 6-23 Supported Location for the Alarm Rear Transition Module in a Netra CT 810 Server (Top View)

FIGURE 6-24 Supported Location for the Alarm Rear Transition Module in a Netra CT 410 Server (Top View)

FIGURE 6-25 Connectors on the Alarm Rear Transition Module

FIGURE 7-1 Locating the Hard Drive LEDs on the System Status Panel (Netra CT 810 Server)

FIGURE 7-2 Drive Bay Cover Locations

FIGURE 7-3 Removing the Removable Media Module from a Netra CT 810 Server

FIGURE 8-1 System Status Panel Locations

FIGURE 8-2 Removing the System Status Panel (Netra CT 810 Server)

FIGURE 8-3 Removing the System Status Panel (Netra CT 410 Server)

FIGURE 8-4 Positioning the System Status Panel (Netra CT 810 Server)

FIGURE 8-5 Positioning the System Status Panel (Netra CT 410 Server)

FIGURE 8-6 Locating the System Controller Board LEDs on the System Status Panel (Netra CT 810 Server)

FIGURE 8-7 Locating the System Controller Board LEDs on the System Status Panel (Netra CT 410 Server)

FIGURE 8-8 Removing a System Controller Board

FIGURE 8-9 Inserting a System Controller Board

FIGURE 8-10 Locating the Air Filters (Netra CT 810 Server)

FIGURE 8-11 Locating the Air Filters (Netra CT 410 Server)

FIGURE 8-12 Locating the Power Supply Unit LEDs on the System Status Panel (Netra CT 810 Server)

FIGURE 8-13 Unlocking a Power Supply Unit

FIGURE 8-14 Removing a Power Supply Unit

FIGURE 8-15 Locating the Fan Tray LEDs on the System Status Panel (Netra CT 810 Server)

FIGURE 8-16 Locating the Fan Tray LEDs on the System Status Panel (Netra CT 410 Server)

FIGURE 8-17 Locating the Fan Trays in a Netra CT 810 Server

FIGURE 8-18 Locating the Fan Trays in a Netra CT 410 Server

FIGURE 8-19 Removing a Fan Tray from a Netra CT 810 Server

FIGURE 8-20 Removing a Fan Tray from a Netra CT 410 Server

FIGURE 9-1 Power Supply Units and Power Sources

FIGURE 9-2 Loosening the Screws at the Top and Bottom of a Netra CT 810 Server

FIGURE 9-3 Loosening the Screws at the Top and Bottom of a Netra CT 410 Server

FIGURE 9-4 Removing or Inserting a Netra CT 810 Server

FIGURE 9-5 Removing or Inserting a Netra CT 410 Server

FIGURE 10-1 Drive Bay Cover Locations

FIGURE 10-2 Removing or Replacing a Cold-Swappable Power Supply Unit From a Netra CT 810 Server

FIGURE 10-3 Removing or Replacing a Cold-Swappable Power Supply Unit From a Netra CT 410 Server

FIGURE 10-4 Removing a Cold-Swappable Power Supply Unit From a Netra CT 410 Server

FIGURE 11-1 Illustrated Parts of Chassis and Components

FIGURE 11-2 Illustrated Parts Breakdown, Netra CT 810 Server

FIGURE 11-3 Illustrated Parts Breakdown, Netra CT 410 Server

FIGURE A-1 Connectors on the Netra CP2140 Host CPU Board

FIGURE A-2 RJ-45 Ethernet Connector Diagram

FIGURE A-3 TTY A Connector

FIGURE A-4 Connectors on the Netra CP2500 Host CPU Board

FIGURE A-5 Netra CP2500 Board PMC Port Connectors

FIGURE A-6 PMC Connector Slot Connector Pins

FIGURE A-7 Front Panel Serial Port Diagram

FIGURE A-8 Backplane Connector Contact Numbering

FIGURE A-9 SW3301 DIP Switch Location

FIGURE A-10 Connectors on the Netra CP2140 Rear Transition Module

FIGURE A-11 RJ-45 Ethernet Connector Diagram

FIGURE A-12 Connectors on the Netra CP2500 Rear Transition Module-Host (RTM-H)

FIGURE A-13 Serial Port Connector Pins

FIGURE A-14 Ethernet Port Connector Pins

FIGURE A-15 On-Board Connectors and Interfaces for the Netra CP2500 RTM-H

FIGURE A-16 On-Board Connectors and Interfaces for the Netra CP2500 RTM-S

FIGURE A-17 I²C Serial Bus Access Header Pins

FIGURE A-18 J0501 and J0502 Connector Pins

FIGURE A-19 CompactPCI RJ3 Connector (J0201) Pins

FIGURE A-20 CompactPCI RJ4 Connector (J0301) Pins

FIGURE A-21 CompactPCI RJ5 Connector (J0401) Pins

FIGURE A-22 Connector Ports in the 6U Single-Wide Alarm Card

FIGURE A-23 Alarm Port

FIGURE A-24 RJ-45 Ethernet Connector Diagram

FIGURE A-25 RJ-45 Ethernet Connector Diagram

FIGURE A-26 Connectors on the Alarm Card (Netra CT 410 Server)

FIGURE A-27 RJ-45 Ethernet Connector Diagram

FIGURE A-28 RJ-45 Ethernet Connector Diagram

FIGURE A-29 Alarm Port

FIGURE A-30 Connectors on the Alarm Rear Transition Module

FIGURE A-31 RJ-45 Ethernet Connector Diagram

FIGURE A-32 COM Port 1 and 2

FIGURE A-33 Alarm Port