C
- cd command, cd Command
- changing password, Change the Administrator Password
- ILOM user
- from CLI, Change an Oracle ILOM User’s Password and or Role (CLI)
- from web, Change an Oracle ILOM User’s Password and or Role (Web)
- chassis
- FRU ID, Display Chassis FRU ID
- monitoring, Chassis Parameters and Status
- status LEDs, Check Chassis Status LEDs
- chassis_led command
- Display the State of the Chassis Status LEDs
- chassis_led Command
- checkboot command
- Verify the Switch Status
- Display Switch Chip Boot Status
- checkboot Command
- checkguidfilesftree command, checkguidfilesftree Command
- checking
- board
- temperature, Display Internal Temperatures
- voltage, Check Board-Level Voltages
chassis status, Display Switch Environmental and Operational Data
- environmental data, Display Switch Environmental and Operational Data
- fan
- speed, Display Fan Status
- status, Display Fan Status
LEDs
- chassis status
- Check Chassis Status LEDs
- Display the State of the Chassis Status LEDs
- fan, Check Fan Status LEDs
- link, Check Link Status LEDs
- network management, Check Network Management Port Status LEDs
- power supply, Check Power Supply Status LEDs
link status, Display Link Status
- port, Check All Ports
- port counters, Display Switch Chip Port Counters
- port status, Display Switch Chip Port Status
- power supply, Display Power Supply Status
- switch chip boot status, Display Switch Chip Boot Status
- checkpower command
- Verify the Switch Status
- Display Power Supply Status
- Power On a Power Supply
- checkpower Command
- checktopomax command, checktopomax Command
- checkvoltages command
- Check Board-Level Voltages
- Power On a Power Supply
- checkvoltages Command
- clear
- data counters, Clear Data Counters
- error counters, Clear Error Counters
- ILOM event log
- from CLI, Clear the Oracle ILOM Event Log (CLI)
- from SNMP, Clear the Oracle ILOM Event Log (SNMP)
- from web, Clear the Oracle ILOM Event Log (Web)
- CLI
- acquiring switch firmware, Acquire the Switch Firmware Package (CLI)
- adding
- ILOM user, Add an Oracle ILOM User Account (CLI)
- SNMP communities, Add SNMP Service Communities (CLI)
- SNMP users, Add SNMP Service User Accounts (CLI)
backing up
- configuration, Back Up the Configuration (CLI)
- SNMP MIBs, Back Up SNMP Service MIBs (CLI)
changing ILOM password, Change an Oracle ILOM User’s Password and or Role (CLI)
- clearing ILOM event log, Clear the Oracle ILOM Event Log (CLI)
- configuring
- SMTP client, Configure the SMTP Client (CLI)
creating
- snapshot, Create a Snapshot of the Switch State (CLI)
deleting
- ILOM user, Delete an Oracle ILOM User Account (CLI)
- SNMP communities, Delete SNMP Service Communities (CLI)
- SNMP users, Delete SNMP Service User Accounts (CLI)
disabling
- alerts, Disable Alerts (CLI)
- HTTP, Disable the HTTP Service (CLI)
- HTTPS, Disable the HTTPS Service (CLI)
- log hosts, Set the Remote Log Hosts (CLI)
- SNMP, Disable the SNMP Service (CLI)
displaying
- aggregate sensors state, Display the Aggregate Sensors State (CLI)
- alerts, Display the Alert Properties (CLI)
- board voltages, Display Board-Level Voltages (CLI)
- CLI timeout, Display the CLI Session Timeout (CLI)
- date, Display the Date (CLI)
- fan speed, Display Fan Status (CLI)
- fan status, Display Fan Status (CLI)
- help, Get Help on an Oracle ILOM Command (CLI)
- HTTP status, Display the HTTP Service Status (CLI)
- HTTPS status, Display the HTTPS Service Status (CLI)
- ILOM event log, Display the Oracle ILOM Event Log (CLI)
- ILOM sessions, Display the Oracle ILOM Sessions (CLI)
- ILOM users, Display the Oracle ILOM User Accounts (CLI)
- ILOM version, Display the Firmware Version (CLI)
- internal temperatures, Display Internal Temperatures (CLI)
- IPMI status, Display the IPMI Service Status (CLI)
- log hosts, Display the Remote Log Hosts (CLI)
- network management configuration, Display the Network Management Configuration (CLI)
- NTP servers, Display the NTP Servers (CLI)
- other aspects, Verifying Other Aspects With Oracle ILOM (CLI)
- power supply FRU ID, Display Power Supply FRU ID (CLI)
- power supply status, Display Power Supply Status (CLI)
- service status, Checking the Status of Services (CLI)
- SMTP client status
- Display the SMTP Client Status (CLI)
- Display the SMTP Client Status (SNMP)
- SNMP communities, Display the SNMP Service Communities (CLI)
- SNMP status, Display the SNMP Service Status (CLI)
- SNMP users, Display the SNMP User Accounts (CLI)
- SSL certificates, Display the SSL Certificates (CLI)
- switch FRU ID, Display Switch FRU ID (CLI)
- switch status LEDs, Display Switch Status LEDs States (CLI)
- system identity, Display Identification Properties (CLI)
- target properties, Get Help on an Oracle ILOM Target Property (CLI)
enabling
- alerts send emails, Enable Alerts to Send Email Alerts (CLI)
- alerts send PETs, Enable Alerts to Send PETs (CLI)
- alerts send traps, Enable Alerts to Send SNMP Traps (CLI)
- HTTP, Enable the HTTP Service (CLI)
- HTTPS, Enable the HTTPS Service (CLI)
- log hosts, Set the Remote Log Hosts (CLI)
- SNMP, Enable the SNMP Service (CLI)
interface overview, CLI Overview
- managing
- HTTP, Managing HTTP Services (CLI)
- HTTPS, Managing HTTPS Services (CLI)
- other aspects, Managing Other Aspects With Oracle ILOM (CLI)
- SNMP, Managing SNMP Services (CLI)
modifying
- SNMP communities, Modify SNMP Service Communities (CLI)
- SNMP users, Modify SNMP Service User Accounts (CLI)
performing
- daily tasks, Performing Daily Tasks (CLI)
- general tasks, Performing General Tasks on Oracle ILOM Targets (CLI)
- ILOM user tasks, Performing Oracle ILOM User Tasks (CLI)
restoring configuration, Restore the Configuration (CLI)
- setting
- CLI timeout, Set the Oracle ILOM CLI Session Timeout (CLI)
- date, Set the Date and Time (CLI)
- log hosts, Set the Remote Log Hosts (CLI)
- network management configuration, Set the Network Management Parameters (CLI)
- NTP servers, Set the Date and Time (CLI)
- SNMP configuration, Configure the SNMP Service (CLI)
- system identity, Set the Identification Properties (CLI)
snapshot dataset information, Snapshot Dataset Information (CLI)
- SSL certificate
- installing, Install a Custom SSL Certificate (CLI)
- removing, Remove the Custom SSL Certificate (CLI)
upgrading switch firmware
- Upgrading the Switch Firmware Through Oracle ILOM (CLI)
- Upgrade the Switch Firmware (CLI)
- command
- chassis_led, Display the State of the Chassis Status LEDs
- checkboot
- Verify the Switch Status
- Display Switch Chip Boot Status
- checkpower
- Verify the Switch Status
- Display Power Supply Status
- Power On a Power Supply
- checkvoltages
- Check Board-Level Voltages
- Power On a Power Supply
- create
- Add an Oracle ILOM User Account (CLI)
- Add SNMP Service User Accounts (CLI)
- Add SNMP Service Communities (CLI)
- dcsport, Display the Switch Chip Port to QSFP Connector Mapping
- delete
- Delete an Oracle ILOM User Account (CLI)
- Delete SNMP Service User Accounts (CLI)
- Delete SNMP Service Communities (CLI)
- disablesm, Disable the Subnet Manager
- disableswitchport, Disable a Switch Chip Port
- dump, Back Up SNMP Service MIBs (CLI)
- enablesm
- Start the Subnet Manager
- Enable the Subnet Manager
- enableswitchport, Enable a Switch Chip Port
- env_test
- Verify the Switch Status
- Display Switch Environmental and Operational Data
- findport, Locate a Switch Chip or Connector From the GUID
- generatetopology, Determine Changes to the InfiniBand Fabric Topology
- getfanspeed
- Verify the Switch Status
- Display Fan Status
- getmaster, Display Recent Subnet Manager Activity
- getportcounters, Display Switch Chip Port Counters
- getportstatus, Display Switch Chip Port Status
- hardware, Understanding Hardware Commands
- chassis_led, chassis_led Command
- checkboot, checkboot Command
- checkguidfilesftree, checkguidfilesftree Command
- checkpower, checkpower Command
- checktopomax, checktopomax Command
- checkvoltages, checkvoltages Command
- connector, connector Command
- dcsport, dcsport Command
- disablecablelog, disablecablelog Command
- disablelinklog, disablelinklog Command
- disablesm, disablesm Command
- disableswitchport, disableswitchport Command
- enablecablelog, enablecablelog Command
- enablelinklog, enablelinklog Command
- enablesm, enablesm Command
- enableswitchport, enableswitchport Command
- env_test, env_test Command
- exit, exit Command (Hardware)
- generatetopology, generatetopology Command
- getfanspeed, getfanspeed Command
- getmaster, getmaster Command
- getnm2type, getnm2type Command
- getportstatus, getportstatus Command
- help, help Command (Hardware)
- ibdevreset, ibdevreset Command
- listlinkup, listlinkup Command
- managementreset, managementreset Command
- matchtopology, matchtopology Command
- setcontrolledhandover, setcontrolledhandover Command
- setloghost, setloghost Command
- setmsmlocationmonitor, setmsmlocationmonitor Command
- setsmpriority, setsmpriority Command
- setsubnetprefix, setsubnetprefix Command
- showfruinfo, showfruinfo Command
- showpsufru, showpsufru Command
- showsmlog, showsmlog Command
- showtemps, showtemps Command
- showtopology, showtopology Command
- showunhealthy, showunhealthy Command
- smconfigtest, smconfigtest Command
- version, version Command (Hardware)
help
- Get Help on an Oracle ILOM Command (CLI)
- Get Help on an Oracle ILOM Target Property (CLI)
- ibcheckerrors, Validate the InfiniBand Fabric and Report Errors
- ibcheckstate, Check All Ports
- ibclearcounters, Clear Data Counters
- ibclearerrors, Clear Error Counters
- ibdatacounts, Display Data Counters for a Node
- ibdevreset
- Reset the Switch Chip
- Recover Ports After Switch Chip Reset
- ibdiagnet
- Perform Diagnostics on the InfiniBand Fabric
- Perform Comprehensive Diagnostics for the Entire Fabric
- Find 1x, SDR, or DDR Links in the Fabric
- Determine Which Links Are Experiencing Significant Errors
- ibdiagpath, Perform Comprehensive Diagnostics for a Route
- ibhosts, Identify All HCAs in the Fabric
- ibnetdiscover
- Discover the InfiniBand Fabric Topology
- Display the InfiniBand Fabric Topology (Simple)
- Display the InfiniBand Fabric Topology (Detailed)
- ibportstate
- Display the Link Status of a Node
- Reset a Port
- Set Port Speed
- Disable a Port
- Enable a Port
- ibswitches, Identify All Switches in the Fabric
- ibtracert, Display a Route Through the Fabric
- ILOM
- cd, cd Command
- create, create Command
- delete, delete Command
- dump, dump Command
- exit, exit Command (ILOM)
- help, help Command (ILOM)
- load, load Command
- reset, reset Command
- set, set Command
- show, show Command
- version, version Command (ILOM)
InfiniBand, Understanding InfiniBand Commands
- ibaddr, ibaddr Command
- ibcheckerrors, ibcheckerrors Command
- ibchecknet, ibchecknet Command
- ibchecknode, ibchecknode Command
- ibcheckport, ibcheckport Command
- ibcheckportstate, ibcheckportstate Command
- ibcheckportwidth, ibcheckportwidth Command
- ibcheckstate, ibcheckstate Command
- ibcheckwidth, ibcheckwidth Command
- ibclearcounters, ibclearcounters Command
- ibclearerrors, ibclearerrors Command
- ibdatacounters, ibdatacounters Command
- ibdatacounts, ibdatacounts Command
- ibdiagnet, ibdiagnet Command
- ibdiagpath, ibdiagpath Command
- ibhosts, ibhosts Command
- ibnetdiscover, ibnetdiscover Command
- ibnetstatus, ibnetstatus Command
- ibnodes, ibnodes Command
- ibportstate, ibportstate Command
- ibroute, ibroute Command
- ibrouters, ibrouters Command
- ibstat, ibstat Command
- ibstatus, ibstatus Command
- ibswitches, ibswitches Command
- ibsysstat, ibsysstat Command
- ibtracert, ibtracert Command
- perfquery, perfquery Command
- saquery, saquery Command
- sminfo, sminfo Command
- smpdump, smpdump Command
- smpquery, smpquery Command
listlinkup
- Check Link Status
- Display Link Status
- Recover Ports After Switch Chip Reset
- load
- Install a Custom SSL Certificate (CLI)
- Upgrade the Switch Firmware (CLI)
- managementreset, Restart the Entire Switch
- matchtopology, Determine Changes to the InfiniBand Fabric Topology
- perfquery, Display Counters for a Node
- reboot, Restart the Management Controller
- setsmpriority
- Start the Subnet Manager
- Display Subnet Manager Priority, Prefix, and Controlled Handover State
- Set the Subnet Manager Priority
- Enable Subnet Manager Controlled Handover
- setsubnetprefix, Set the Subnet Manager Prefix
- showfruinfo, Display Chassis FRU ID
- showpsufru, Display Power Supply FRU ID
- showsmlog, Display the Subnet Manager Log
- showtemps, Display Internal Temperatures
- showunhealthy
- Verify the Switch Status
- Display Switch General Health
- sminfo, Display Subnet Manager Status
- smpquery
- Display Low-Level Detailed Information About a Node
- Display Low-Level Detailed Information About a Port
- SNMP, SNMP Commands
- ssh, Access the Management Controller From the Network Management Port
- version
- Display Switch Firmware Versions
- Install the Oracle ILOM Firmware Version 1.1.3
- Display the Firmware Version (CLI)
- configuring SMTP client
- from CLI, Configure the SMTP Client (CLI)
- from SNMP, Configure the SMTP Client (SNMP)
- from web, Configure the SMTP Client (Web)
- connecting InfiniBand cables, Connecting InfiniBand Cables
- connector
- InfiniBand cable, QSFP Connector and Pins
- network management, Network Management Connector and Pins
- QSFP, QSFP Connector and Pins
- status window
- InfiniBand, InfiniBand Connector Status Window
USB management, USB Management Connector and Pins
- connector command, connector Command
- controlling
- hardware, Controlling the Hardware
- ILOM targets
- from CLI, Controlling Oracle ILOM Targets (CLI)
- from SNMP, Controlling Oracle ILOM Targets (SNMP)
- from web, Controlling Oracle ILOM Targets (Web)
InfiniBand fabric, Controlling the InfiniBand Fabric
- Subnet Manager, Controlling the Subnet Manager
- create command
- Add an Oracle ILOM User Account (CLI)
- Add SNMP Service User Accounts (CLI)
- Add SNMP Service Communities (CLI)
- create Command
- creating
- snapshot
- from CLI, Create a Snapshot of the Switch State (CLI)
- from web, Create a Snapshot of the Switch State (Web)