JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Sun Ethernet Fabric Operating System

VLAN Administration Guide
Oracle Technology Network
Library
PDF
Print View
Feedback
search filter icon
search icon

Document Information

Using This Documentation

Product Notes

Related Documentation

Acronyms and Abbreviations

CLI Command Modes

Feedback

Support and Accessibility

Protocol Description

Introduction

VLAN Configuration

Configuration Guidelines

Default Settings

Configuring Static VLAN Entries

Create Member Ports

Create Forbidden Ports

Viewing VLAN Information

Retrieve the VLAN Summary

Retrieve the Configuration Details for all of the VLANs on a Switch

Retrieve the Configuration Details of a particular VLAN on the Switch

Delete a VLAN

Enable VLANs

Configure a Static Unicast Entry

Configure a Static Multicast Entry

Configure Dynamic VLAN Learning

Configure Dynamic Multicast Learning

Configure Restricted VLAN Registration

Configure Restricted Group Registration

Configuring QinQ

Enable Tunneling on a Port

Enable STP Packet Tunneling

Configure QinQ

Configuring Service Classes and Expedited Traffic

Map a Priority to Traffic Class

Configuring Port Filtering

Configure the Acceptable Frame Type

Configure Ingress Filtering

Flow-Based Configuration

Flow-Based Example Topologies

Example Topolgy 1

Example Topolgy 2

Example Topolgy 3

Configuring Static Unicast and Multicast Entries

Configure Static Unicast Entry in Topology 1

Configure Static Unicast Entry in Topology 2

Configuring GVRP

Configure VGRP for Topology 1

Configure VGRP for Topology 2

Configure VLANs on the Nonroot Bridge

Configure Restricted VLAN Registration

Configure GMRP

Configure Restricted Group Registration

Classify VLANs

Create Acceptable Frame Types

Configure Ingress Filtering

CLI Command Modes

The following table lists the configuration modes used in this document with their access and exit methods.

Command Mode
Access Method
Prompt
Exit Method
User EXEC
Access SEFOS from Oracle ILOM with read-only rights (privilege level 1).
SEFOS>
Use logout or exit to return to the Oracle ILOM prompt.
Privileged EXEC
Access SEFOS from Oracle ILOM with full administrative rights (privilege level 15).
SEFOS#
Use the logout or exit command to return to the Oracle ILOM prompt.
Global Configuration
From User EXEC mode, use the enable command.
SEFOS(config)#
Use the end command to return to Privileged EXEC mode.
Interface Configuration
From Global Configuration mode, use the interface interface-type interface-id command.
SEFOS(config-if)#
Use the exit command to return to Global Configuration mode, or use the end command to return to Privileged EXEC mode.
Copyright © 2010, 2011, Oracle and/or its affiliates. All rights reserved. Legal Notices
Previous Next