About This Documentation (PDF and HTML)
SAS Device Access to the Chassis SAS-2 Domain
Host Access to Storage Module Resources Using the Sun Blade Zone Manager
How to Assign Storage to Hosts Using the CMM ILOM Web Interface
How to Assign Storage to Hosts Using the CMM ILOM CLI
Overview of Storage Module Management
Management Options Using the CMM ILOM
Management Options Using the Sun Storage 6Gb SAS REM RAID HBA (SGX-SAS6-R-REM-Z)
Management Options Using the Sun Storage 6Gb SAS REM HBA (SGX-SAS6-REM-Z)
Performing Maintenance and Hot Plug Actions
Preparing for Hot Plug Actions
Recovering Zoning Configurations
Upgrading Storage Module Firmware
Importing Existing Virtual Drives to a Replacement REM
Replacing a REM on a SPARC System
Replacing a REM on an x86 System
Storage Module Sensors and Indicators
Displaying Sensor and Indicator Information Using the CMM ILOM Web Interface
Displaying Sensor and Indicator Information Using the CMM ILOM CLI
Management of your storage module is done at two levels: disk management and enclosure management.
Disk management involves tasks performed through a server's RAID Expansion Module (REM) utilities to create volumes, disk spares, view logged disk errors, mount and unmount disks, and replace faulty disks.
Enclosure management involves tasks performed through the Chassis Monitoring Module (CMM) to configure host–based storage zoning, upgrade module firmware, monitor module status, obtain FRU information and perform a storage module reset.
If the REM management software supports SES, enclosure management features such as module status (temperature, voltage, LEDs) and FRU information might also be available in addition to disk management features.
Topics discussed in this section include: