About This Documentation (PDF and HTML)
SAS Device Access to the Chassis SAS-2 Domain
Host Access to Storage Module Resources Using the Sun Blade Zone Manager
How to Assign Storage to Hosts Using the CMM ILOM Web Interface
How to Assign Storage to Hosts Using the CMM ILOM CLI
Management Options Using the CMM ILOM
Management Options Using the Sun Storage 6Gb SAS REM RAID HBA (SGX-SAS6-R-REM-Z)
Management Options Using the Sun Storage 6Gb SAS REM HBA (SGX-SAS6-REM-Z)
Performing Maintenance and Hot Plug Actions
Preparing for Hot Plug Actions
Recovering Zoning Configurations
Upgrading Storage Module Firmware
Importing Existing Virtual Drives to a Replacement REM
Replacing a REM on a SPARC System
Replacing a REM on an x86 System
Storage Module Sensors and Indicators
Displaying Sensor and Indicator Information Using the CMM ILOM Web Interface
Displaying Sensor and Indicator Information Using the CMM ILOM CLI
Your Sun Blade Storage Module M2 supports a powerful set of enclosure management features accessible from the CMM or a management client that supports SES-2 (SCSI Enclosure Services) and SMP (Serial Management Protocol). Some or all of these features are available through supported management software, such as the Sun Blade Zone Manager feature of the CMM, or the LSI MegaRAID Storage Manager software. These features provide a system administrator the following capabilities:
Monitor the storage module status (on/off line status, component health)
Be alerted to a change in state of the storage module environment (voltage and temperature)
Identify and locate storage module components
Obtain Field Replaceable Unit (FRU) identification and status of hard disks
Prepare hard disks for removal
Reset the storage module
Upgrade storage module expander firmware
Receive event alerts and view event logs to aid in troubleshooting